Post by thread:[PIC]:Flash memory code

Dear all, I think I asked this once before, but no harm in asking again... Does anyone have any code for accessing flash memory? I have all the routines for I2C, but the flash I am thinking of (Toshiba TC58FVT160FT-85) uses parallel addressing, which I presume is actually a lot easier than serial. Before I give it a go, I wondered if anyone out there has tried it? TIA, Chris -- Dr. Chris Kirtley MD PhD Associate Professor HomeCare Technologies for the 21st Century (Whitaker Foundation) NIDRR Rehabilitation Engineering Research Center on TeleRehabilitation Dept. of Biomedical Engineering, Pangborn 105B Catholic University of America 620 Michigan Ave NE Washington, DC 20064 Tel. 202-319-6247, fax 202-319-4287 Email: spam_OUTkirtleyTakeThisOuTcua.edu http://engineering.cua.edu/biomedical Clinical Gait Analysis: http://guardian.curtin.edu.au/cga Send subscribe/unsubscribe to .....listprocKILLspam@spam@info.curtin.edu.au -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

Tia, why bother with parallel if I2C works fine. Andre {Quote hidden}> > I think I asked this once before, but no harm in asking again... > > Does anyone have any code for accessing flash memory? I have all the > routines for I2C, but the flash I am thinking of (Toshiba > TC58FVT160FT-85) uses parallel addressing, which I presume is actually a > lot easier than serial. Before I give it a go, I wondered if anyone out > there has tried it? > > TIA, > > Chris > -- > Dr. Chris Kirtley MD PhD > Associate Professor > HomeCare Technologies for the 21st Century (Whitaker Foundation) > NIDRR Rehabilitation Engineering Research Center on TeleRehabilitation > Dept. of Biomedical Engineering, Pangborn 105B > Catholic University of America > 620 Michigan Ave NE > Washington, DC 20064 > Tel. 202-319-6247, fax 202-319-4287 > Email: kirtleyKILLspamcua.edu > http://engineering.cua.edu/biomedical > > Clinical Gait Analysis: http://guardian.curtin.edu.au/cga > Send subscribe/unsubscribe to .....listprocKILLspam.....info.curtin.edu.au > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

Hello Dr Chris, try this, it has a pic in it http://lillith.sk.tsukuba.ac.jp/~kashima/games/gbread2e.html alice {Quote hidden}> Dear all, > > I think I asked this once before, but no harm in asking again... > > Does anyone have any code for accessing flash memory? I have all the > routines for I2C, but the flash I am thinking of (Toshiba > TC58FVT160FT-85) uses parallel addressing, which I presume is actually a > lot easier than serial. Before I give it a go, I wondered if anyone out > there has tried it? > > TIA, > > Chris > -- > Dr. Chris Kirtley MD PhD > Associate Professor > HomeCare Technologies for the 21st Century (Whitaker Foundation) > NIDRR Rehabilitation Engineering Research Center on TeleRehabilitation > Dept. of Biomedical Engineering, Pangborn 105B > Catholic University of America > 620 Michigan Ave NE > Washington, DC 20064 > Tel. 202-319-6247, fax 202-319-4287 > Email: EraseMEkirtleyspam_OUTTakeThisOuTcua.edu > http://engineering.cua.edu/biomedical > > Clinical Gait Analysis: http://guardian.curtin.edu.au/cga > Send subscribe/unsubscribe to listprocspam_OUTinfo.curtin.edu.au > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads > > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads