Post by thread:[PIC]: mcu.cz ICD2 kit?

'[PIC]: mcu.cz ICD2 kit?'

Hi,

  Has anyone ordered an ICD2 kit from http://www.mcu.cz? What's their service like?

Good, bad, about average? Is the ICD2 kit any good?

Thanks.

-- 

Phil.                              | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,

spam_OUTphilpemTakeThisOuTphilpem.me.uk              | ViewFinder, 10BaseT Ethernet, 2-slice,

http://www.philpem.me.uk/          | 48xCD, ARCINv6c IDE, SCSI

... There's no elevator to success. You have to take the stairs.

_______________________________________________

http://www.piclist.com

View/change your membership options at

http://mailman.mit.edu/mailman/listinfo/piclist

I bought only the PCB's for $12 ea, and built them up. I have 3. They 

all work fine, except they

are slower than the USB ICD2's. Otherwise, work exactly the same. 

Actually better, as the

connector is easier to use than the RJ11 telco connector.

Their kit is $55, I think. It would probably be worth the effort if you 

only want one clone.

My cost for all three was about $45 each including all expenses.

MCU was very fast (9 days) on the first order of 2 PCBs but on the last 

order they were 30 days.

Very responsive by emasil when you have a Q.

Be sure to socket the 877; you need to install the bootloader program to 

make it work.

--Bob

Philip Pemberton wrote:

>Hi,

>  Has anyone ordered an ICD2 kit from http://www.mcu.cz? What's their service like?

>Good, bad, about average? Is the ICD2 kit any good?

>

>Thanks.

>  

>

-- 

Note: Attachments must be sent to

 .....attachKILLspam@spam@engineer.cotse.net, and 

 MAY delay replies to this message.

        520-219-2363

_______________________________________________

http://www.piclist.com

View/change your membership options at

http://mailman.mit.edu/mailman/listinfo/piclist

Well, $8 handling on a PCB is too much I think. 

On Mon, 20 Sep 2004 23:41:59 +0100, Philip Pemberton

<philpemKILLspamdsl.pipex.com> wrote:

> Hi,

>  Has anyone ordered an ICD2 kit from http://www.mcu.cz? What's their service like?

> Good, bad, about average? Is the ICD2 kit any good?

-- 

Chetan Bhargava

http://www.bhargavaz.net

_______________________________________________

http://www.piclist.com

View/change your membership options at

http://mailman.mit.edu/mailman/listinfo/piclist

i ordered the clone, and got it short time before the new revision was

released. then got it replaced with the new one for free!

so I think, service is quite good.

I have not yet soldered and tested it.

tino

************************************************************************

******************************

>{Original Message removed}
Does mcu.cz have an english version of their web page?

Norris

Buehler, Martin wrote:

{Quote hidden}>i ordered the clone, and got it short time before the new revision was

>released. then got it replaced with the new one for free!

>so I think, service is quite good.

>I have not yet soldered and tested it.

>tino

>

>************************************************************************

>******************************

>

>  

>

>>{Original Message removed}
www.mcu.cz/modules/news/article.php?storyid=449

-----Original Message-----

From: .....piclist-bouncesKILLspam.....mit.edu [EraseMEpiclist-bouncesspam_OUTTakeThisOuTmit.edu] On Behalf

Of Norris Smith

Sent: Monday, September 27, 2004 4:41 PM

To: Microcontroller discussion list - Public.

Subject: Re: [PIC]: mcu.cz ICD2 kit?

Does mcu.cz have an english version of their web page?

Norris

Buehler, Martin wrote:

{Quote hidden}>i ordered the clone, and got it short time before the new revision was 

>released. then got it replaced with the new one for free! so I think, 

>service is quite good. I have not yet soldered and tested it.

>tino

>

>***********************************************************************

>*

>******************************

>

>  

>

>>-----Original Message-----

>>From: Philip Pemberton [philpemspam_OUTdsl.pipex.com]

>>Sent: Tuesday, September 21, 2004 12:42 AM

>>To: @spam@piclistKILLspammit.edu

>>Subject: [PIC]: mcu.cz ICD2 kit?

>>

>>Hi,

>> Has anyone ordered an ICD2 kit from http://www.mcu.cz? What's their service 

>>like? Good, bad, about average? Is the ICD2 kit any good?

>>

>>Thanks.

>>--

>>Phil.                              | Acorn Risc PC600 Mk3, SA202,

64MB,

{Quote hidden}>>6GB,

>>KILLspamphilpemKILLspamphilpem.me.uk              | ViewFinder, 10BaseT Ethernet,

>>    

>>

>2-slice,

>  

>

>>http://www.philpem.me.uk/          | 48xCD, ARCINv6c IDE, SCSI

>>... There's no elevator to success. You have to take the stairs. 

>>_______________________________________________

>>http://www.piclist.com

>>View/change your membership options at 

>>mailman.mit.edu/mailman/listinfo/piclist

>>    

>>

>

>_______________________________________________

>http://www.piclist.com

>View/change your membership options at 

>http://mailman.mit.edu/mailman/listinfo/piclist

>

>  

>

_______________________________________________

http://www.piclist.com

View/change your membership options at

http://mailman.mit.edu/mailman/listinfo/piclist

_______________________________________________

http://www.piclist.com

View/change your membership options at

http://mailman.mit.edu/mailman/listinfo/piclist