Exact match. Not showing close matches.
'[PIC]: how to support USB RIGHT NOW!'
Correct me if I'm wrong, but due to the speed requirements of USB
interfaces, it is generally considered to be outside the ability of the
standard PICs to support without USB hardware enhancement.
You can get the USB spec from
but we are talking 1.5 Mbit/sec to 480 Mbit/sec
Microchip has said that it will release some PIC's 16C745/765 with USB
hardware on board, Real Soon Now. But they haven't. So there isn't any code
or devices available. Right?
So that leaves:
If you don't mind using an external device
has application notes for thier NET2888 including firmware for the Scenix SX
28AC (An #15) which can be converted to the PIC using
Parallax to PIC source converter from Tony Nixon. It needs the .lst file as
well as the .src file to function correctly, so compile the parallax file
first using tech-tools
with the command CVASM16 <file>.src /L then press the ParaPic start button,
click on a Parallax .src file, watch the progress indicator on the form, and
voila, you have a PIC.asm file. Any errors are listed in the new .asm file.
The Dontronics / Scott Edwards conversion was done with the first version
and is being recoverted here so don't take that as an example!
Or better yet, you can use
Macros for using Parallax instructions with MPASM. Also Prlx.asm
The FT8U8232AM is claimed to be a cost-effective single chip USB UART
solution for transferrins serial data over the universal serial bus (USB).
It can be used to upgraded RS-232 designs to USB with minimal development
and cost. The traditional approach was to redesign the product using a USB
microcontroller, however by replacing the RS232 level converter IC inside
the product with the FT8U232AM and installed the included drivers, the job
is done. Features include transfer rates up to 920 kb/s (rs232) and 2Mb/s
(RS422/RS485). Price is $3 each/1000. For more details, call SAELIG CO,
LLC, VIctor NY (716) 425-3753. Enter number 419 at http://www.eepn.com
Anybody have any other ideas?
http://usbsimm.home.att.net USB SIMM (8051 with hardware USB support)
http://www.lvr.com/usb.htm USB Central
James Newton (PICList Admin #3)
piclist.com 1-619-652-0593 jamesnewton
PIC/PICList FAQ: http://www.piclist.com or .org
From: Benjamin Triplett [capitalist.net] triplett
Sent: Tuesday, November 21, 2000 13:23
Subject: Form posted from Mozilla
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email mitvma.mit.edu with SET PICList DIGEST in the body listserv
|In article <000801c05410$31e0cd40$efplus.com>, James Newton 0600a8c0
<PICLIST.COM> writes jamesnewton
>Microchip has said that it will release some PIC's 16C745/765 with USB
>hardware on board, Real Soon Now. But they haven't. So there isn't any code
>or devices available. Right?
Wrong, the 16C745 and 765 are available but in limited numbers at the
moment I have one 745 at the moment with some more due any day, I also
got hold of some 765's last week but returned them as I wanted 745's.
Sample code is available on the microchip web site and that is what I
have used as a starting point for my project, the sample simulates a USB
mouse so you don't need any special PC driver or software to check the
hardware is working.
| Ken Hewitt G8PWC | Email welwyn.demon.co.uk | ken
| /\/\/\/\/\/\/\/\/ | Homepage http://www.welwyn.demon.co.uk |
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads
More... (looser matching)
- Last day of these posts
- In 2000
, 2001 only
- New search...