Post by thread:[PIC]: braincramp...._

This is what I have..... LIST P=18F8525 #include <P18F8525.INC> ; File contains addresses for register and bit names __CONFIG _OSC_HS_1H & _OSCS_ON_1H & _PWRT_ON_2L & _BOR_ON_2L But I get this error Argument out of range (not a valid config register address) I'm sure its just something simple....just not seeing it right off --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages! -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

The syntax for config stuff is usually something like: __config <address> , <parameters> You have left off the address and the comma. See the datasheet and the inc file for examples of the address. MD At 09:40 AM 7/26/04, you wrote: {Quote hidden}>This is what I have..... > > LIST P=18F8525 > #include <P18F8525.INC> ; File contains addresses for register and bit names > __CONFIG _OSC_HS_1H & _OSCS_ON_1H & _PWRT_ON_2L & _BOR_ON_2L > >But I get this error > >Argument out of range (not a valid config register address) > >I'm sure its just something simple....just not seeing it right off -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

In 6.x of MPLAB, the configure->Processor menu selection overrides the P= directive. Are you sure that you have selected the correct processor? Are there warnings you get before the argument out of range? --McD {Original Message removed}

Alan, Just a guess but did you format the config stuff like this? __CONFIG _CONFIG1H, _OSC_HS_1H & _OSCS_OFF_1H __CONFIG _CONFIG2L, _BOR_OFF_2L & _PWRT_OFF_2L __CONFIG _CONFIG2H, _WDT_OFF_2H Bill {Original Message removed}

You have: LIST P=18F8525 The include file says: ; 2. LIST directive in the source file ; LIST P=PIC18F8525 You have: #include ; File contains addresses for register and bit names __CONFIG _OSC_HS_1H & _OSCS_ON_1H & _PWRT_ON_2L & _BOR_ON_2L The include file says: _CONFIG1H _OSC_HS_1H & _OSCS_ON_1H _CONFIG2L _PWRT_ON_2L & _BOR_ON_2L David Bearrow -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics