Searching \ for '[PIC]: Serial Programmer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=programmer
Search entire site for: 'Serial Programmer'.

Exact match. Not showing close matches.
PICList Thread
'[PIC]: Serial Programmer'
2000\07\21@133100 by Javier Grijalba

flavicon
face
Hi,
Does anybody know which software to use with  a serial LUDI PIPO type 16F84
programmer ??
I always used PIX113b (I think there aren´t any newer versions), but know I
own an Athlon and get a RUNTIME ERROR 200 at ...
Any hints to solve this problem are welcome, maybe slowing down the PC ??
Bye
Javier

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements

2000\07\21@141716 by Sebastian Garcia

flavicon
face
Javier,

-----Original Message-----
From: Javier Grijalba <spam_OUTgrijalbaTakeThisOuTspamCVTCI.COM.AR>
To: .....PICLISTKILLspamspam@spam@MITVMA.MIT.EDU <PICLISTspamKILLspamMITVMA.MIT.EDU>
Date: Friday, July 21, 2000 2:36 PM
Subject: [PIC]: Serial Programmer


|Hi,
|Does anybody know which software to use with  a serial LUDI PIPO type 16F84
|programmer ??
|I always used PIX113b (I think there aren´t any newer versions), but know I
|own an Athlon and get a RUNTIME ERROR 200 at ...
|Any hints to solve this problem are welcome, maybe slowing down the PC ??
|Bye
|Javier

I never used that soft, but probably the problem is in the timings at
programming, usually based on delay procedures that are relative to the
machine speed. Take a look at your BIOS options to slow down your uP.

Best Regards,

S.-

BTW: Pls don't forget Szklanny!!!   ;)

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements

2000\07\21@143816 by Ries van Twisk

flavicon
face
Maby this is a long shot but:
Is your new Arhon much faster then you PC you had in the past AND is the software DOS based?

If this is so then software was properly writen in pascal (6 or 7 I think).

DOS based Pascal programms don't run on very fast computer wich will give you a runtime error. I kow there is a pach in the net that can pach you program so it runs on fast computers again. It's just a matter of running the pach agains your programm.

Ries
>>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<

On 7/20/00, 5:40:32 AM, Javier Grijalba <.....grijalbaKILLspamspam.....CVTCI.COM.AR> wrote regarding [PIC]: Serial Programmer:


> Hi,
> Does anybody know which software to use with  a serial LUDI PIPO type
16F84
> programmer ??
> I always used PIX113b (I think there aren´t any newer versions), but know I
> own an Athlon and get a RUNTIME ERROR 200 at ...
> Any hints to solve this problem are welcome, maybe slowing down the PC ??
> Bye
> Javier

> --
> http://www.piclist.com hint: PICList Posts must start with ONE topic:
> [PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements
--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]: PIC only [EE]: engineering [OT]: off topic [AD]: advertisements

2000\07\22@053207 by Tsvetan Usunov

flavicon
face
>Does anybody know which software to use with  a serial LUDI PIPO type 16F84
>programmer ??
>I always used PIX113b (I think there aren?t any newer versions), but know I
>own an Athlon and get a RUNTIME ERROR 200 at ...
>Any hints to solve this problem are welcome, maybe slowing down the PC ??
>Bye
>Javier

ICPROG is the best windows based software for JDM/Ludipipo serial port
programmers.
You can download from: http://www.h2deetoo.demon.nl/
Our PG001 serial port programmer works fine with this soft and can program
PIC12Cxxx, PIC16x8x and 24Cxx.
http://www.olimex.com/kits/pg001.html

Regards

Tsvetan
---
PCB prototypes for $26 at http://run.to/pcb

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...