Post by thread:[PIC]: Problem with NOPPP and PIC16F84

Hi, (First sorry by my english) This is my first post to the list. I have a question over the NOPPP. I build the NOPPP and this work ok with short program, but with long program not work. I test with two long program Maxipic and ST1-64F and not work, i received the messagge: Failed at 0000: Expecting (something), found 3FFF I was read the FAQ over this topic, i have a short cable, run the voltage test and is ok. With shorter program is all ok, but with more long program not work. Any have other comment over this problem ??? Thanks for your time. Esteban Arias spam_OUTeariasTakeThisOuThanna.cl -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

Esteban Hello and welcome to the list. I have just built the NOPPP the main problem is after the lead length is the power supply. but as you can programme short code this may not be the case. you long program may be wrapping round so the end is over writing the address at 0000: if you want me to try and program your code in to a 16F84 here. you could send me the code to .....wildKILLspam@spam@blueyonder.co.uk not via the list. and I will try Re:GARDS Art. {Original Message removed}

Esteban Just a thought look for Noppp9x.exe http://rcg.homepage.com/ this program loads all the code in a window and you may find out your problem. Re:Gards Art. {Original Message removed}