Post by thread:[PIC]: Interfacing to an lcd display

How would I interface a pic to an lcd display, such as one sold by dick smith? -- http://www.piclist.com hint: To leave the PICList spam_OUTpiclist-unsubscribe-requestTakeThisOuTmitvma.mit.edu

Depends on its controller... If it's HD44780 compatible, the datasheets are all over the place, and really pretty simple to get working in either a 8 or 4-bit interface... If it's serial, well, then serially! .....nickKILLspam@spam@veys.com | http://www.veys.com/nick > {Original Message removed}

Arpit wrote: > > How would I interface a pic to an lcd display, such as one sold by > dick smith? Hi Arpit, I have used the Dick Smith product LCD display 2x16 char. You need the hitachi 44780 datasheet, and most of the PIC/LCD code samples you get will work fine. Standard dataset. :o) -Roman -- http://www.piclist.com hint: To leave the PICList piclist-unsubscribe-requestKILLspammitvma.mit.edu

hd44780 compatible LCD's in nibble and byte mode interface, schematic at: http://www.geocities.com/vsurducan/f84lcd.html http://www.geocities.com/vsurducan/pic/f877.html Vasile On Wed, 25 Jul 2001, Arpit wrote: > How would I interface a pic to an lcd display, such as one sold by > dick smith? > > -- > http://www.piclist.com hint: To leave the PICList > .....piclist-unsubscribe-requestKILLspam.....mitvma.mit.edu > > -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads