Searching \ for '[PIC]: Combo EEPROM & PIC programmer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=programmer
Search entire site for: 'Combo EEPROM & PIC programmer'.

Exact match. Not showing close matches.
PICList Thread
'[PIC]: Combo EEPROM & PIC programmer'
2002\09\14@223053 by Steve Ruse

flavicon
face
Are there any good low cost options out there? I would like to be able to
program virtually any PIC as well as 28F512 EEPROMs. So far all of the
programmers I've found are in the $700+USD range. Is there anything out that
for around $300-$400 that will do this?

Thanks,

Steve Ruse

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


2002\09\14@230700 by Karl Seibert

flavicon
face
Take a look at http://www.galep.com .  It doesn't have every
PIC, but it does have a lot.  Look at the parts list and see
if it has what you need.  I have a Galep-III at work when I
needed a cheap programmer for a (gasp) non-PIC part.

Karl

Quoting Steve Ruse <spam_OUTsteveTakeThisOuTspamWOTELECTRONICS.COM>:

{Quote hidden}

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


2002\09\14@232819 by Dave King

flavicon
face
At 09:30 PM 14/09/02 -0700, you wrote:
>Are there any good low cost options out there? I would like to be able to
>program virtually any PIC as well as 28F512 EEPROMs. So far all of the
>programmers I've found are in the $700+USD range. Is there anything out that
>for around $300-$400 that will do this?
>
>Steve Ruse

I just ran across one called the Pony Programmer which looks interesting.
It does the range of Pic, avrs and eeproms.

Sort of like the "Gump" project that is a universal one.

Program Forrest Program..... ;-]


Dave

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


2002\09\15@083443 by Olin Lathrop

face picon face
> Are there any good low cost options out there? I would like to be able to
> program virtually any PIC as well as 28F512 EEPROMs. So far all of the
> programmers I've found are in the $700+USD range. Is there anything out
that
> for around $300-$400 that will do this?

The Microchip Picstart+ will program any PIC, and I think also the EEPROMs
but am not sure.  These officially cost $200 retail.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics


2002\09\15@113833 by Morgan Olsson

picon face
I was just looking at Eagle CAD and found this:
ftp://ftp.cadsoft.de/pub/userfiles/projects/wineprom.zip
Includes single sided layout in pdf, test program, and programming program and driver for Win9x and WinNTx

Not as capable as you want though, but if people contribute work on it... :)
Home: http://www.willem.org


From readme:

Devices Currently Supported
---------------------------
24C02 - 24C512
27C64 - 27C040          (27C32 needs a slight change to the board design)
27C1001                 (Actually it's the same as a 27C010)
28C65 - 28C040
28F64 - 28F040
29F64 - 29F010
16C84
16F84
12C508, 12C509          *** NOT WORKING ***
16C620, 16C621, 16C622
93C46 - 93C66

/Morgan

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics


2002\09\15@124250 by wagner

flavicon
face
> Are there any good low cost options out there? I would like to be able to
> program virtually any PIC as well as 28F512 EEPROMs. So far all of the
> programmers I've found are in the $700+USD range. Is there anything out that
> for around $300-$400 that will do this?

Check EPROMER5 at http://www.ustr.net

> Thanks,
>
> Steve Ruse


-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics


2002\09\15@141130 by kben

picon face
>> Are there any good low cost options out there? I would like to be able to

>> program virtually any PIC as well as 28F512 EEPROMs. So far all of the
>> programmers I've found are in the $700+USD range. Is there anything out
>that
>> for around $300-$400 that will do this?

Try the WARP13A @   http://www.newfoundelectronics.com/

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics


2002\09\16@033004 by dr. Imre Bartfai

flavicon
face
Hi,

an interesting approach would be to look at http://www.elnec.sk. I personally
purchased the Smartprog of their range, and I am happy with it. About 3000
different part can be programmed with it, DOS & Windoze supported. It is
an Industrial Quality Programmer for PICs as verify them on the both end
of allowed voltage range.

Regards,
Imre

+-----------------------------------------------------------------------+
| The information transmitted is intended only for the person or entity |
| to which it is addressed and may contain confidential and/or          |
| privileged material.  Any review, retransmission, dissemination or    |
| other use of, or taking of any action in reliance upon, this          |
| information by persons or entities other than the intended recipient  |
| is prohibited. If you received this in error, please contact the      |
| sender and delete the material from any computer.                     |
+-----------------------------------------------------------------------+

On Sat, 14 Sep 2002, Steve Ruse wrote:

{Quote hidden}

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


2002\09\16@051753 by Eric Bohlman

picon face
9/14/02 11:30:10 PM, Steve Ruse <.....steveKILLspamspam@spam@WOTELECTRONICS.COM> wrote:

>Are there any good low cost options out there? I would like to be able to
>program virtually any PIC as well as 28F512 EEPROMs. So far all of the
>programmers I've found are in the $700+USD range. Is there anything out that
>for around $300-$400 that will do this?

The Needham's EMP-11 will do that, and runs around $325.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


2002\09\16@053702 by Reelf Monsees

flavicon
face
have a look at the HED.CHIP from http://www.sywitec.de/ programs nearly everything (well, almost...) and the price ist
about 250 Euro.

regards,
   Reelf

Eric Bohlman schrieb:
{Quote hidden}

-- SyWiTec *  Systeme für Wissenschaft und Technik
            Bamberg & Monsees GbR
        Steindamm 22 * D-28719 Bremen
  Fon +49-421-646775 * Fax +49-421-646785
            http://www.sywitec.de/

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


More... (looser matching)
- Last day of these posts
- In 2002 , 2003 only
- Today
- New search...