Post by thread:[PIC]: Automatic bulk programmer

source= http://www.piclist.com/postbot.asp?id=piclist\2002\07\22\111327a The wheel design needs only a motor and NO solenoids because you can set up the wheel to run over bumps or openings that do the work and are activated by the motion of the wheel. One exception might be a solenoid to eject failed chips at a different point. I've seen machines like this before. The wheel is also a cam or has several cams on the same shaft and the bumps on the cam(s) activate the motion of the stations around the wheel. Very complex motions can be programmed with several cams. --- James Newton: PICList.com webmaster, former Admin #3 spam_OUTjamesnewtonTakeThisOuTpiclist.com 1-619-652-0593 phone http://www.piclist.com/member/JMN-EFP-786 PIC/PICList FAQ: http://www.piclist.com -- http://www.piclist.com hint: To leave the PICList .....piclist-unsubscribe-requestKILLspam@spam@mitvma.mit.edu