Post by thread:[PIC:] Warp-13

I've used a PICSTART+ at work for about a year now with pretty satisfactory results. Except it seems kinda slow programming. But now I'm looking to start doing some PIC projects at home and I'm looking at my options: 1.) a parallel-port Tait style programmer. Seems pretty limited in the number of different PICs they can program. 2.) Buy a picstart plus. Don't really want to spend $200. or 3.) Buy a WARP-13. Cheaper... hmmm. My question: Anyone have any comments about the Warp-13? Good or bad experiences? Insider info... Thanks to all for your reply(s). Last point, I don't want to start any wars here about which programmer is best and for what reasons, etc... Just looking for input on the Warp13. Robert Mash -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email spam_OUTlistservTakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body

I've been using it and I love it. It programs a lot of different chips, it programs them fast just as the site advertises, and when I have had questions I've gotten good help from them. Up until now I've just been putting the PICs in the ziff socket, but this weekend I plan on doing my first ICSP and I expect that to go good as well. {Original Message removed}

I have a warp-13a and it is indeed very good, have had no problems other than some stupidity on my part. On a Sunday afternoon I sent Jim an email asking about device support for a new pic which wasn't currently supported, but had some on hand I was wanting to program. Within an hour I had a new exe from him with support for the new chip. I'm a very happy customer. Regards, Bob Robert Mash <.....rmashKILLspam@spam@GLOBALCOOLING.COM> wrote .. {Quote hidden}> I've used a PICSTART+ at work for about a year now with pretty satisfactory > results. Except it seems kinda slow programming. > But now I'm looking to start doing some PIC projects at home and I'm looking > at my options: > > 1.) a parallel-port Tait style programmer. Seems pretty limited in the > number of different PICs they can program. > > 2.) Buy a picstart plus. Don't really want to spend $200. > > or > > 3.) Buy a WARP-13. Cheaper... hmmm. > > My question: Anyone have any comments about the Warp-13? Good or bad > experiences? Insider info... > > Thanks to all for your reply(s). > Last point, I don't want to start any wars here about which programmer > is best and for what reasons, etc... > Just looking for input on the Warp13. > > > > Robert Mash > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email listservKILLspammitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email .....listservKILLspam.....mitvma.mit.edu with SET PICList DIGEST in the body

Robert Mash wrote : > But now I'm looking to start doing some PIC projects at home > and I'm looking at my options:... You did not mention it, but have you looked at the Wisp628 ? http://www.voti.nl/wisp628/index.html I'm using it and likes it... Jan-Erik. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email EraseMElistservspam_OUTTakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body

> My question: Anyone have any comments about the Warp-13? > Good or bad experiences? Insider info... I've used a Warp-13 & EPIC for years. Both are fast, easy to use and reliable. Regards, -Bruce techspam_OUTrentron.com http://www.rentron.com -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email @spam@listservKILLspammitvma.mit.edu with SET PICList DIGEST in the body

Add mine to the list of names who love the Warp13a. I bought one a few years back, and it has been amazing. Jim is a great guy to deal with (even though he occasionally gets bogged down due to the volume of email). It's a quality product at a great price. If you're in North America, you can buy it from Peter Anderson (http://www.phanderson.com) and he'll throw in the power supply. He usually takes the summer off though, dunno if he's on vacation yet. Josh On Fri, 18 Jun 2004 20:19:00 +0200, Jan-Erik Soderholm <KILLspamjan-erik.soderholmKILLspamtelia.com> wrote: {Quote hidden}> > Robert Mash wrote : > > > But now I'm looking to start doing some PIC projects at home > > and I'm looking at my options:... > > You did not mention it, but have you looked at the Wisp628 ? > > http://www.voti.nl/wisp628/index.html > > I'm using it and likes it... > > Jan-Erik. > > > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email RemoveMElistservTakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email spamBeGonelistservspamBeGonemitvma.mit.edu with SET PICList DIGEST in the body

Jan, I have looked at the Wisp 628, but not for a while.. I'll look at it again. It seems that I was concerned about it's support for different PIC's. I've come to use the 12F675, the 16F684, 16F688, and the 18F458 on a fairly regular basis, and I'd like to not have to worry about non-microchip entities supporting their programmers in the future. Maybe i'm thinking about this too hard. I'll look at the Wisp again. Thanks, Bob {Original Message removed}

From Peter Anderson's website: (May 22, '04). I no longer sell the WARP13. )^: > > If you're in North America, you can buy it from Peter Anderson > (http://www.phanderson.com) and he'll throw in the power supply. He > usually takes the summer off though, dunno if he's on vacation yet. > > Josh -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email TakeThisOuTlistservEraseMEspam_OUTmitvma.mit.edu with SET PICList DIGEST in the body

> It seems that I was concerned about it's support for different PIC's. > I've come to use the 12F675, the 16F684, 16F688, and the > 18F458 on a fairly > regular basis, That's me to blame. Actually those chips are all supported by the latest software (updates are free), but I am lousy in updating the webpage. > and I'd like to not have to worry about non-microchip > entities supporting their programmers in the future. That's a problem you will have with any non-microchip programmer. If you are into flash only you could consider the ICD2. Be aware that all software involved in the Wisp628 is there for you to adapt if you ever want to. There are people out there who send me bug fixes :) > I'll look at the Wisp again. No, no, WISP is the predecessor of Wisp628, don't look at that old beast! (Although it did have its merits, like variable-vcc verification.) Wouter van Ooijen -- ------------------------------------------- Van Ooijen Technische Informatica: http://www.voti.nl consultancy, development, PICmicro products -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email RemoveMElistservTakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body

I bought a Wisp628 kit from Wouter [I'm in New York] and I didn't have any problems. Wouter is very helpful toward his customers, and the software upgrades are free, as they should be [Unlike microEngineering labs which wanted $30+ for software for their old-style parallel port programmer] Sorry I don't know about the Warp-13, but I definitely recommend the Wisp628 Robert Mash wrote: >3.) Buy a WARP-13. Cheaper... hmmm. > >My question: Anyone have any comments about the Warp-13? Good or bad experiences? Insider info... > >Thanks to all for your reply(s). >Last point, I don't want to start any wars here about which programmer is best and for what reasons, etc... >Just looking for input on the Warp13. > > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listservEraseME.....mitvma.mit.edu with SET PICList DIGEST in the body

Josh Koffman wrote: >Add mine to the list of names who love the Warp13a. I bought one a few >years back, and it has been amazing. Jim is a great guy to deal with >(even though he occasionally gets bogged down due to the volume of >email). It's a quality product at a great price. > >If you're in North America, you can buy it from Peter Anderson >(http://www.phanderson.com) and he'll throw in the power supply. He >usually takes the summer off though, dunno if he's on vacation yet. > > > http://www.phanderson.com/warp-13.html " (May 22, '04). I no longer sell the WARP13." -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email EraseMElistservmitvma.mit.edu with SET PICList DIGEST in the body

At 11:52 AM 6/18/2004, Robert Mash wrote: >I've used a PICSTART+ at work for about a year now with pretty >satisfactory results. Except it seems kinda slow programming. >But now I'm looking to start doing some PIC projects at home and I'm >looking at my options: > >1.) a parallel-port Tait style programmer. Seems pretty limited in the >number of different PICs they can program. > >2.) Buy a picstart plus. Don't really want to spend $200. 3) Purchase a Microchip ICD2 using the DSPic competition discount voucher. US $99 from Arrow (don't need actual coupon) or any of the other distributors. You will also have to make a little adapter board maps the 6 pin telco cable to the PIC you want to program. The nice thing about this is that you get the debug capability for no extra charge <grin>. dwayne -- Dwayne Reid <RemoveMEdwaynerEraseMEEraseMEplanet.eon.net> Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 20 years of Engineering Innovation (1984 - 2004) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email RemoveMElistservspam_OUTKILLspammitvma.mit.edu with SET PICList DIGEST in the body

On Fri, 18 Jun 2004 14:23:00 -0400 Josh Koffman <RemoveMEjoshybearTakeThisOuTspamGMAIL.COM> writes: > If you're in North America, you can buy it from Peter Anderson > (http://www.phanderson.com) and he'll throw in the power supply. He > usually takes the summer off though, dunno if he's on vacation yet. > > Josh You can buy it from http://www.thebytegfactory.com, as well. I did think $21 for slow shipping/handling from TN to OH was a bit excessive, though. All I bought was the Warp13a, a prototyping board, and a chip. By slow I mean it didn't ship for 2 days after the order was placed. Aaron ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit http://www.juno.com to sign up today! -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email EraseMElistservspamspamBeGonemitvma.mit.edu with SET PICList DIGEST in the body

I ended up going with a Wisp628 kit for 23$. Thanks for your input list-members. Bob ----- Original Message ----- From: "Martin Klingensmith" <RemoveMEmartinKILLspamNNYTECH.NET> To: <PICLISTSTOPspamspam_OUTMITVMA.MIT.EDU> Sent: Friday, June 18, 2004 3:32 PM Subject: Re: [PIC:] Warp-13 > I bought a Wisp628 kit from Wouter [I'm in New York] and I didn't have > any problems. Wouter is very helpful toward his customers, and the > software upgrades are free, as they should be [Unlike microEngineering > labs which wanted $30+ for software for their old-style parallel port > programmer] > > Sorry I don't know about the Warp-13, but I definitely recommend the Wisp628 > > Robert Mash wrote: > > >3.) Buy a WARP-13. Cheaper... hmmm. > > > >My question: Anyone have any comments about the Warp-13? Good or bad experiences? Insider info... > > > >Thanks to all for your reply(s). > >Last point, I don't want to start any wars here about which programmer is best and for what reasons, etc... > >Just looking for input on the Warp13. > > > > > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email spamBeGonelistservSTOPspamEraseMEmitvma.mit.edu with SET PICList DIGEST in the body > -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics