Exact match. Not showing close matches.
'[PIC:] USART Interrupt'
> I unmask the USART receive peripheral interrupt (bsf
> PIE1, RCIE),
init ;(setup port A/B I/O, set baud rate to 2400bps,
;enable async USART transmit, initialize LCD)
bsf PIE1, RCIE ;unmask USART receive interrupt
If you aren't changing to Bank1, then you're setting bit5 in PIR1
(address 0c), not bit5 in PIE1 (address 8c)
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
More... (looser matching)
- Last day of these posts
- In 2004
, 2005 only
- New search...