Searching \ for '[OT] Re: recomendations on PCB method?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'Re: recomendations on PCB method?'.

Exact match. Not showing close matches.
PICList Thread
'[OT] Re: recomendations on PCB method?'
1999\03\23@121152 by Niklas CarlŽn

flavicon
face
Hi

I use my HP deskjet 600 to produce the original. Presentation mode (lots of
ink) and regular laser printer paper works fine. I've tried this down to 10
mil width and 10 mil clearence with good results. The time in the
UV-exposure unit is a bit long with laser paper but what wouldn't you do to
save money :-)? I built my own exposure unit and the material was pretty
inexpensive (if you compare to a ready-made one), but the result is (almost)
always perfect. If you build your own exposure unit you will get away with
expenses < 100 bucks (I think).
Not even making double-sided boards is a real problem with this method.

Thats my opinion & experience at least.

/Niklas CarlŽn


{Original Message removed}


'[OT] Re: recomendations on PCB method?'
1999\04\12@105843 by Kevin
flavicon
face
Thanks Niklas!!

Kevin





-----Original Message-----
From: Niklas CarlŽn <spam_OUTniklas.krakauTakeThisOuTspamSWIPNET.SE>
To: .....PICLISTKILLspamspam@spam@MITVMA.MIT.EDU <PICLISTspamKILLspamMITVMA.MIT.EDU>
Date: Tuesday, March 23, 1999 5:12 PM
Subject: [OT] Re: recomendations on PCB method?


Hi

I use my HP deskjet 600 to produce the original. Presentation mode (lots of
ink) and regular laser printer paper works fine. I've tried this down to 10
mil width and 10 mil clearence with good results. The time in the
UV-exposure unit is a bit long with laser paper but what wouldn't you do to
save money :-)? I built my own exposure unit and the material was pretty
inexpensive (if you compare to a ready-made one), but the result is (almost)
always perfect. If you build your own exposure unit you will get away with
expenses < 100 bucks (I think).
Not even making double-sided boards is a real problem with this method.

Thats my opinion & experience at least.

/Niklas CarlŽn


-----Original Message-----
From: Ryan Pogge <.....poggeKILLspamspam.....SHORE.INTERCOM.NET>
To: EraseMEPICLISTspam_OUTspamTakeThisOuTMITVMA.MIT.EDU <PICLISTspamspam_OUTMITVMA.MIT.EDU>
Date: den 23 mars 1999 14:04
Subject: recomendations on PCB method?


hello,
I am looking to purchase some PCB makeing equipment
I would like to spend <100 dollars and be able to make
fairly profesional looking PCB's.  I have only tried pen resist
etching with stuff from radio shack...and the results are not good.

I was hopeing some of you have expirience with different
systems and could recomend one... If I have to use a laser
printer I could goto kinkos or something I guess... all I have here is
and epson stylus 800 inkjet.

thanks for the help.
Ryan



ù¬¬¬¬ùù''¡¼¼¡''ùù''¡¼¼¡''ùù''¡¼¼¡''ùù¬¬¬¬ù
Ryan Pogge
@spam@PoggeKILLspamspamshore.intercom.net
ICQ UIN 1187367
ù¬¬¬¬ùù''¡¼¼¡''ùù''¡¼¼¡''ùù''¡¼¼¡''ùù¬¬¬¬ù
>

More... (looser matching)
- Last day of these posts
- In 1999 , 2000 only
- Today
- New search...