Searching \ for '[OT] Plotting PCB resist patterns directly on copp' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'Plotting PCB resist patterns directly on copp'.

Exact match. Not showing close matches.
PICList Thread
'[OT] Plotting PCB resist patterns directly on copp'
1997\09\14@125115 by Martin R. Green

picon face
Recently several people were discussing how to use a flatbed plotter to
place etch resist patterns directly on PCB copper.  I commented that I'd
seen a good article recently and I'd look it up.  Well, here it is:

  Electronics World, July 1997

This article discusses several methods for getting a resist pattern onto
the copper, and concludes that the best results are with a converted
plotter.  It also discusses various types of inks that have been tried, and
show good colour photos of the results with each.

If anyone can't find the magazine at their local library, or is just plain
too lazy, I have scanned the article into 5 GIF's and 1 JPG (for the colour
photo page), and would be happy to email it to any interested parties.  The
scans are 200 DPI and  total about 8-900K.

Let me know if you have any special needs, otherwise I'll send them MIME
format, six separate attachments.


CIAO - Martin R. Green
spam_OUTelimarTakeThisOuTspambigfoot.com

1997\09\14@231759 by Shane Nelson

flavicon
face
>> In private email I said to Martin:

If you're getting a large amount of requests for the article I
could post it to my web page for you.  Then you'd only have to
email it once :)

If you wanna do this email me the articles... Later today I'll
post them and give the url on the list.

>> Then Martin said to me:

Good idea, and THX.


>> So I'm saying to all of you:

There's a link at the top of the page:
http://www.spots.ab.ca/~i/

-Shane.

1997\09\15@122508 by David W. Duley

picon face
In a message dated 97-09-14 12:59:51 EDT, you write:

<<
If anyone can't find the magazine at their local library, or is just plain
too lazy, I have scanned the article into 5 GIF's and 1 JPG (for the colour
photo page), and would be happy to email it to any interested parties.  The
scans are 200 DPI and  total about 8-900K.

Let me know if you have any special needs, otherwise I'll send them MIME
format, six separate attachments.


CIAO - Martin R. Green
.....elimarKILLspamspam@spam@bigfoot.com >>
Hello Martin,
I would like to see the article please.  My Email address id DreiTekspamKILLspamaol.com
Thanks
David Duley
V.P. DreiTek Inc.

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...