Post by thread:[OT] PCB SOFTWARE

Hi, I have a friend that has the ExpertPCB cad software to design PCB's, there is a version problem to print the job under Windows95/98, it was produced to Windows3.xx, the manufacturer has no support anymore for it. Is there anybody out there with same software/problem? Wagner

I just run such things under Win3.x on an older machine - Easy enough to get Win 3.11 (surplus around HERE, anyways!), then use a LAN to pass the data to your other workstation(s). But I'm weird that way <G> Also could multi-boot that machine, boot to Dos/Win 3.x, do that work & print, then later re-boot to Win95/98, that's do-able as well. Mark Wagner Lipnharski wrote: > > Hi, I have a friend that has the ExpertPCB cad software > to design PCB's, there is a version problem to print the > job under Windows95/98, it was produced to Windows3.xx, > the manufacturer has no support anymore for it. > Is there anybody out there with same software/problem? > > Wagner

Randy . . . . does this package have a decent * board-outline* capability or the ability to change the board outline as you make mods. ? Regards . . . Steve {Original Message removed}