Searching \ for '[OT] 3D Drawing' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=drawing
Search entire site for: '3D Drawing'.

Exact match. Not showing close matches.
PICList Thread
'[OT] 3D Drawing'
2000\05\02@120330 by Greg Scott

flavicon
face
Hi All,
Does anyone have experience with 3D Drawing software?
I am looking for software to purchase, that will enable me to draw custom
plastic parts.
Ease of use(short learning curve), compatibility with mold makers and
prototypers is priority.
Any good or bad experiences you can relate would be appreciated.
Thanks,
   Greg Scott

2000\05\02@120935 by Quitt, Walter

flavicon
face
You ask for toooooo much.
But your priority can be met with ProEngineer.
That's what we've been using.
We tried several others before too.

GL,
Walt...

-----Original Message-----
From: Greg Scott [spam_OUTgregscottTakeThisOuTspamMO-NET.COM]
Sent: Tuesday, May 02, 2000 9:52 PM
To: .....PICLISTKILLspamspam@spam@MITVMA.MIT.EDU
Subject: [OT] 3D Drawing


Hi All,
Does anyone have experience with 3D Drawing software?
I am looking for software to purchase, that will enable me to draw custom
plastic parts.
Ease of use(short learning curve), compatibility with mold makers and
prototypers is priority.
Any good or bad experiences you can relate would be appreciated.
Thanks,
   Greg Scott

2000\05\02@121343 by James Wilson

flavicon
face
Solidworks is good. http://www.solidworks.com

James Wilson
http://www.geminidataloggers.com

| -----Original Message-----
| From: Greg Scott [gregscottspamKILLspamMO-NET.COM]
| Sent: 03 May 2000 05:52
| To: .....PICLISTKILLspamspam.....MITVMA.MIT.EDU
| Subject: [OT] 3D Drawing
|
| Hi All,
| Does anyone have experience with 3D Drawing software?

2000\05\02@122550 by Kyle Schulmeyer

flavicon
face
Solidworks would be your best bet. We draw models with solidworks
and then make them in a Stratasys machine.

Regards,

KC
----- Original Message -----
From: Quitt, Walter <EraseMEwquittspam_OUTspamTakeThisOuTMICROJOIN.COM>
To: <PICLISTspamspam_OUTMITVMA.MIT.EDU>
Sent: Tuesday, May 02, 2000 11:06 AM
Subject: Re: [OT] 3D Drawing


> You ask for toooooo much.
> But your priority can be met with ProEngineer.
> That's what we've been using.
> We tried several others before too.
>
> GL,
> Walt...
>
> {Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...