Searching \ for '[OT]: OrCad schematic viewer & printer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=orcad+schematic
Search entire site for: 'OrCad schematic viewer & printer'.

Exact match. Not showing close matches.
PICList Thread
'[OT]: OrCad schematic viewer & printer'
2001\01\24@193525 by Douglas Wood

picon face
Does anyone know of viewer/printer software for looking at and printing
OrCad schematics?

Douglas Wood
Software Engineer
spam_OUTdbwoodTakeThisOuTspamkc.rr.com

Home of EIS (Enhanced Instruction Set) for the PIC

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


2001\01\24@194545 by David VanHorn

flavicon
face
At 06:37 PM 1/24/01 -0600, Douglas Wood wrote:
>Does anyone know of viewer/printer software for looking at and printing
>OrCad schematics?

They have a shareware version on CDROM for free.
Limited capacity, but might serve.

If you're talking old orcad (SDT, PCB) then you need someone like me to
load the files and output them.

--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


2001\01\25@010325 by Douglas Wood

picon face
No, I'm using OrCad Capture V7.20. I have  a couple schematics that I need
to send via e-mail, but the recipient does have a copy of OrCad. All he
really wants to do is print the schematics at his site once he receives
them; there's no need for him to modify them.

Douglas Wood
Software Engineer
.....dbwoodKILLspamspam@spam@kc.rr.com

Home of EIS (Enhanced Instruction Set) for the PIC

{Original Message removed}

2001\01\25@013247 by Douglas Wood

picon face
David,

Do you have a copy of the demo CD-ROM? If so, could I get a copy from you?

Douglas Wood
Software Engineer
dbwoodspamKILLspamkc.rr.com

Home of the EPICIS Development Tools for the PIC and SX

{Original Message removed}

2001\01\25@015721 by Andrew E. Kalman

flavicon
face
Re:

>All he
>really wants to do is print the schematics at his site once he receives
>them; there's no need for him to modify them.

If you have the full version of Acrobat you could .pdf them ...
--

 ______________________________________
  Andrew E. Kalman, Ph.D.   .....aekKILLspamspam.....pumpkininc.com

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email EraseMElistservspam_OUTspamTakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body


2001\01\25@024521 by Vasile Surducan

flavicon
face
you may use Printgl if you save your design as hp-gl file.
SDT works ok, PCB I don't know.
Vasile




On Wed, 24 Jan 2001, Douglas Wood wrote:

{Quote hidden}

> {Original Message removed}

2001\01\25@034738 by Loram, Tim

flavicon
face
               Hi,

                       I believe that you can download a freeware/shareware
version of an Orcad viewer at the following.


http://www.orcad.com/Technical/SoftwareUpdate/SoftwareUpdate.asp

                       Hope this helps.  I haven't tried it myself.  I use
a student version of Orcad 9 for one of the courses I am attending at the
moment.

               Regards

               Tim Loram

               Test Engineer
               @spam@tloramKILLspamspamharman.com



                               {Original Message removed}

2001\01\25@072750 by mike

flavicon
face
On Wed, 24 Jan 2001 22:31:28 -0700, you wrote:

>Re:
>
>>All he
>>really wants to do is print the schematics at his site once he receives
>>them; there's no need for him to modify them.
On the old DOS ORCAD, you can output DXF or Postscript to file using
the PLOTALL plotter driver.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email KILLspamlistservKILLspamspammitvma.mit.edu with SET PICList DIGEST in the body


2001\01\25@101726 by Bob Ammerman

picon face
Can you create PDF's?

Bob Ammerman
RAm Systems
(contract development of high performance, high function, low-level
software)

{Original Message removed}

2001\01\25@105543 by David VanHorn

flavicon
face
At 12:35 AM 1/25/01 -0600, Douglas Wood wrote:
>David,
>
>Do you have a copy of the demo CD-ROM? If so, could I get a copy from you?

Well, yes, but Orcad gives them away.

--
Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email RemoveMElistservTakeThisOuTspammitvma.mit.edu with SET PICList DIGEST in the body


2001\01\25@120010 by Douglas Wood

picon face
No.

Douglas Wood
Software Engineer
spamBeGonedbwoodspamBeGonespamkc.rr.com

Home of the EPICIS Development Tools for the PIC and SX

{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2001 , 2002 only
- Today
- New search...