Post by thread:[EE] Re: AcceleroMeter (looking)

On 7/13/05, Mateusz Goÿffffb3ÿffffb9bek <spam_OUTmat_euszTakeThisOuTyahoo.com> wrote: > I am looking accelerometer (vibroMeter) for checking vibration on CNC > machine(there must be posibility controling vibrtion separatlly in x y and z > direction). During last view weeks i have noticed that you have speak at > little about this. Could anybody adviece me where can i buy Cheap > accelerometers ( that would be great to find small company who is > specializing in this type of meserment compontnts). > Abybody could advice me something ? I think you don't need an accelerometer if you are interested only in vibration detection on every axes of your CNC. Usualy a right positioned piezoelectric sensor may give you some complete informations about vibrations. best regards,

Take a look at the Freescale 7260Q tri-axial acceleromenter at http://www.freescale.com/ (where else?). This is a programmable device (1.5, 2, 6 etc gees) that might fit the bill for you. HTH Vic ________________________________________________________ Victor Fraenckel - The Windman victorf ATSIGN windreader DOTcom KC2GUI Home of the WindReader Electronic Theodolite Read the WIND

Thanks Vic tis is exactlly this what i need. By the way i have checked also Texas instruments catalog but as i see only Freescale have such modul with complet software :) thanks Vic Fraenckel <.....victorfKILLspam@spam@windreader.com> wrote: Take a look at the Freescale 7260Q tri-axial acceleromenter at http://www.freescale.com/ (where else?). This is a programmable device (1.5, 2, 6 etc gees) that might fit the bill for you. HTH Vic ________________________________________________________ Victor Fraenckel - The Windman victorf ATSIGN windreader DOTcom KC2GUI Home of the WindReader Electronic Theodolite Read the WIND