Searching \ for '[EE] Eagle -- soldermask over vias' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=eagle
Search entire site for: 'Eagle -- soldermask over vias'.

Exact match. Not showing close matches.
PICList Thread
'[EE] Eagle -- soldermask over vias'
2005\06\04@005133 by PicDude

flavicon
face
Anyone here know how to specify the vias should be covered with soldermask
using Eagle?

Cheers,
-Neil.


2005\06\04@033216 by William Chops Westfield

face picon face

On Jun 3, 2005, at 9:55 PM, PicDude wrote:

> Anyone here know how to specify the vias should be covered with
> soldermask
> using Eagle?
>
In the DRC "Masks" tab, set the "limit" value bigger than your via size.

BillW

2005\06\04@102521 by olin piclist

face picon face
PicDude wrote:
> Anyone here know how to specify the vias should be covered with
> soldermask using Eagle?

In the DRC settings increase the minimum size via that will be covered by
solder mask.  There may even be a setting to always cover them, but I'm not
sure off the top of my head.


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com

2005\06\06@112102 by PicDude

flavicon
face
Does the trick.  Thanks.


On Saturday 04 June 2005 02:32 am, William "Chops" Westfield scribbled:
> On Jun 3, 2005, at 9:55 PM, PicDude wrote:
> > Anyone here know how to specify the vias should be covered with
> > soldermask
> > using Eagle?
>
> In the DRC "Masks" tab, set the "limit" value bigger than your via size.
>
> BillW


More... (looser matching)
- Last day of these posts
- In 2005 , 2006 only
- Today
- New search...