Searching \ for '[EE] Cheap PCB service w/ 0.050 stock?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'Cheap PCB service w/ 0.050 stock?'.

Exact match. Not showing close matches.
PICList Thread
'[EE] Cheap PCB service w/ 0.050 stock?'
2003\02\02@174458 by C. A. Weagle

flavicon
face
Hello all,

I've recently been climbing the learning curve on PCB design; I've done some
homebrew single-sided boards, and now want to have some double-sided,
thru-plated boards fabbed.  Nothing very large or in quantity, but I need them
to be on 0.050 stock.  I've looked at a lot of the board houses that Piclister's
have mentioned, and many on (Cadsoft) Eagle's web resource page, but to no
avail.  Any pointers?

--
Christian A. Weagle

We pray for one last landing on the globe that gave us birth; let us
rest our eyes on fleecy skies and the cool, green hills of Earth.

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

2003\02\02@180754 by Spehro Pefhany

picon face
At 05:33 PM 2/2/2003 -0500, you wrote:
>Hello all,
>
>I've recently been climbing the learning curve on PCB design; I've done some
>homebrew single-sided boards, and now want to have some double-sided,
>thru-plated boards fabbed.  Nothing very large or in quantity, but I need them
>to be on 0.050 stock.  I've looked at a lot of the board houses that
>Piclister's
>have mentioned, and many on (Cadsoft) Eagle's web resource page, but to no
>avail.  Any pointers?

APcircuits has 0.031" laminate, if that's any help, for proto boards.

For small runs like a few hundred, ask the manufacturers.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
spam_OUTspeffTakeThisOuTspaminterlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics

2003\02\21@005736 by C. A. Weagle

flavicon
face
Hello all,

I've recently been climbing the learning curve on PCB design; I've done some
homebrew single-sided boards, and now want to have some double-sided,
thru-plated boards fabbed.  Nothing very large or in quantity, but I need them
to be on 0.050 stock.  I've looked at a lot of the board houses that Piclister's
have mentioned, and many on (Cadsoft) Eagle's web resource page, but to no
avail.  Any pointers?

--
Christian A. Weagle

We pray for one last landing on the globe that gave us birth; let us
rest our eyes on fleecy skies and the cool, green hills of Earth.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

2003\02\21@011938 by Dwayne Reid

flavicon
face
At 12:49 AM 2/21/03 -0500, C. A. Weagle wrote:
>Hello all,
>
>  Nothing very large or in quantity, but I need them
>to be on 0.050 stock.  I've looked at a lot of the board houses that
>Piclister's
>have mentioned, and many on (Cadsoft) Eagle's web resource page, but to no
>avail.  Any pointers?

I've never seen that thickness before.  0.062" is standard and I've seen
(and done) boards in 0.031" but I do not recall ever seeing anyone offering
0.050".

Why that thickness, if you don't mind me asking?

dwayne

--
Dwayne Reid   <.....dwaynerKILLspamspam@spam@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax

Celebrating 19 years of Engineering Innovation (1984 - 2003)
 .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-.   .-
    `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'   `-'
Do NOT send unsolicited commercial email to this email address.
This message neither grants consent to receive unsolicited
commercial email nor is intended to solicit commercial email.

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

2003\02\21@015535 by Ned Konz

flavicon
face
On Thursday 20 February 2003 10:17 pm, Dwayne Reid wrote:
> but I do not recall ever seeing anyone offering
> 0.050".
>
> Why that thickness, if you don't mind me asking?

Isn't that SIMM thickness?
--
Ned Konz
http://bike-nomad.com
GPG key ID: BEEA7EFE

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

2003\02\21@045042 by cdb

flavicon
face
On Fri, 21 Feb 2003 00:49:50 -0500, C. A. Weagle wrote:
ve looked at a lot of the board houses that Piclister's

I've just found this one today, don't know what they're like they
reckon they'll do 4 4"*3" DS boards for U$19.95 introductory $22.95
normal.

http://www.e-teknet.com they also do PCB stuffing.

colin
--
cdb, bodgy1spamKILLspamoptusnet.com.au on 21/02/2003

I have always been a few Dendrites short of an Axon and believe me it
shows.

Light travels faster than sound. That's why some people appear bright
until they speak!

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

2003\02\21@082502 by D. Jay Newman

flavicon
face
Perhaps Olimex?  http://www.olimex.com/

And yes, this is SIMM thickness, still used for SimmStick boards.

> On Thursday 20 February 2003 10:17 pm, Dwayne Reid wrote:
> > but I do not recall ever seeing anyone offering
> > 0.050".
> >
> > Why that thickness, if you don't mind me asking?
>
> Isn't that SIMM thickness?
> --
> Ned Konz
--
D. Jay Newman           !  I can bring whole cities to ruin,
.....jayKILLspamspam.....sprucegrove.com     !    And still have time to get a soft-shoe in...
http://enerd.ws/        !      -- from Buffy, "Once More with Feeling"

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

More... (looser matching)
- Last day of these posts
- In 2003 , 2004 only
- Today
- New search...