Searching \ for '[EE] nite lites with light sensitive switch 75 ce' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=nite+lites+with
Search entire site for: 'nite lites with light sensitive switch 75 ce'.

Exact match. Not showing close matches.
PICList Thread
'[EE] nite lites with light sensitive switch 75 ce'
2006\05\21@142229 by Gus Salavatore Calabrese

face picon face
I found these at Lowe's Hardware.
They have all sorts of possibilities

see http://nope9.com/projects-axxx/tiki-index.php?page=A321

POD

2006\05\21@151539 by Dave Lag

picon face
Gus Salavatore Calabrese wrote:
> I found these at Lowe's Hardware.
> They have all sorts of possibilities
>
> see nope9.com/projects-axxx/tiki-index.php?page=A321
>
> POD
The Cds cells would cost you that much alone.
SCR = half wave? part number?
D

2006\05\21@180806 by Gus S Calabrese

face picon face
It is labeled as an SCR on the PCB,
there is no part number.


On 2006-May 21, at 1:16 PM, Dave Lag wrote:

Gus Salavatore Calabrese wrote:
> I found these at Lowe's Hardware.
> They have all sorts of possibilities
>
> see http://nope9.com/projects-axxx/tiki-index.php?page=A321
>
> POD
The Cds cells would cost you that much alone.
SCR = half wave? part number?
D

2006\05\21@182401 by Steve Smith

flavicon
face
2n5064,2n4444,tic106 should be 400v for 110v line or 600v for 240 line about
1A min for 40w to allow for cold filament current
Half wave yes
Bottom terminal is cathode middle is gate top is anode (from drawing) made
in china by the M

Steve

{Original Message removed}

2006\05\21@183235 by Spehro Pefhany

picon face
At 04:08 PM 5/21/2006 -0600, you wrote:
>It is labeled as an SCR on the PCB,
>there is no part number.

Probably similar to 2N5064 (sensitive gate SCR). Half wave is better
for a nightlight- the bulb life is extended greatly.

But an LED or EL lamp would be better from an energy pov.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
spam_OUTspeffTakeThisOuTspaminterlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com
->>Test equipment, parts OLED displys http://search.ebay.com/_W0QQsassZspeff


2006\05\21@184634 by Gus S Calabrese

face picon face
Who or what is "M" ?

2N4444  600V / 5.1A
2N5064 - 200 V, 800 mA, Plastic SCR.
TIC106  5A 400V SCR
00000000000000000000000000000000000000000000000

On 2006-May 21, at 4:24 PM, Steve Smith wrote:

2n5064,2n4444,tic106 should be 400v for 110v line or 600v for 240  
line about
1A min for 40w to allow for cold filament current
Half wave yes
Bottom terminal is cathode middle is gate top is anode (from drawing)  
made
in china by the M

Steve

{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2006 , 2007 only
- Today
- New search...