Searching \ for '[EE][OT] STRIP-X (enamel wire)' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=
Search entire site for: '[OT] STRIP-X (enamel wire)'.

Exact match. Not showing close matches.
PICList Thread
'[EE][OT] STRIP-X (enamel wire)'
2000\05\16@044518 by Joe McCauley

picon face
As I indicated a soldering iron is how I am doing this at the moment but
with wire as fine as 0.032mm
you can very easily damage the wire. If you are making contacts on a
precisely wound and balanced 5K turn
balanced coil system you cannot afford to loose any wire from the end of the
winding never mind at the start
of the winding. A chemical stripper is the best way to go here IMHO.

Joe

{Original Message removed}

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...