Searching \ for '[EE]: Supplier of single-sided PCB prototypes' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'Supplier of single-sided PCB prototypes'.

Exact match. Not showing close matches.
PICList Thread
'[EE]: Supplier of single-sided PCB prototypes'
2004\06\09@163944 by Spehro Pefhany

picon face
Are there any really cheap (including shipping cost) suppliers of
single-sided prototype PCBs that anyone would like to share?

I'm looking for non-plated through holes (so, not the typical 2-layer PCB
process) and if they had access to the typical low-cost crappy laminates as
an option, all the better.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
spam_OUTspeffTakeThisOuTspaminterlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com

--
http://www.piclist.com hint: To leave the PICList
.....piclist-unsubscribe-requestKILLspamspam@spam@mitvma.mit.edu

2004\06\09@172136 by Shawn Wilton

flavicon
face
Olimex is the first company that comes to mind for me.

-Shawn


Spehro Pefhany wrote:

{Quote hidden}

--
http://www.piclist.com hint: To leave the PICList
EraseMEpiclist-unsubscribe-requestspam_OUTspamTakeThisOuTmitvma.mit.edu

2004\06\09@173345 by Matt Pobursky

flavicon
face
On Wed, 9 Jun 2004 16:48:51 -0400, Spehro Pefhany wrote:
> Are there any really cheap (including shipping cost) suppliers of
> single-sided prototype PCBs that anyone would like to share?
>
> I'm looking for non-plated through holes (so, not the typical 2-layer PCB
> process) and if they had access to the typical low-cost crappy laminates as
> an option, all the better.

You're in Canada, right?

Have you tried AP Circuits? I use them all the time and like their 2
layer proto board service. I've run single sided board designs through
their proto service also. Fast, cheap and reliable. I'm not sure about
their shipping costs in Canada though...

http://www.apcircuits.com/index.html

Matt Pobursky
Maximum Performance Systems

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-requestspamspam_OUTmitvma.mit.edu

2004\06\09@183848 by Jose Da Silva

flavicon
face
On June 9, 2004 01:48 pm, Spehro Pefhany wrote:
>Are there any really cheap (including shipping cost) suppliers of
>single-sided prototype PCBs that anyone would like to share?
>
>I'm looking for non-plated through holes (so, not the typical 2-layer PCB
>process) and if they had access to the typical low-cost crappy laminates
> as an option, all the better.
>
>Best regards,

For occasional stuff, you can get tiny PCBs at Radio Shack.
Around a few dollars for 1 or 2 boards per package.

--
http://www.piclist.com hint: To leave the PICList
@spam@piclist-unsubscribe-requestKILLspamspammitvma.mit.edu

2004\06\09@184301 by Shawn Wilton

flavicon
face
I think he's talking about custom pcbs.


Jose Da Silva wrote:

{Quote hidden}

--
http://www.piclist.com hint: To leave the PICList
RemoveMEpiclist-unsubscribe-requestTakeThisOuTspammitvma.mit.edu

2004\06\09@185007 by Michael J. Pawlowsky

flavicon
face
Check out Olimex.
http://www.olimex.com/pcb/index.html


>>On June 9, 2004 01:48 pm, Spehro Pefhany wrote:
>> >Are there any really cheap (including shipping cost) suppliers of
>> >single-sided prototype PCBs that anyone would like to share?
>> >
>> >I'm looking for non-plated through holes (so, not the typical 2-layer PCB
>> >process) and if they had access to the typical low-cost crappy laminates
>> > as an option, all the better.

--
http://www.piclist.com hint: To leave the PICList
spamBeGonepiclist-unsubscribe-requestspamBeGonespammitvma.mit.edu

2004\06\09@192014 by Dmitriy Fitisov

flavicon
face
AP Circuits does not seem to be inexpensive.
I've used custompcb and the only additional charge I paid about 11 $Cdn to
FedEx
for custom duty. Otherwise as advertised - 46 $US for 2 double sided
with shipping

Dmitriy.

{Original Message removed}

2004\06\09@220713 by David Koski

flavicon
face
On Wed, 9 Jun 2004 16:48:51 -0400
Spehro Pefhany <TakeThisOuTspeffEraseMEspamspam_OUTINTERLOG.COM> wrote:

> Are there any really cheap (including shipping cost) suppliers of
> single-sided prototype PCBs that anyone would like to share?
>
> I'm looking for non-plated through holes (so, not the typical 2-layer PCB
> process) and if they had access to the typical low-cost crappy laminates as
> an option, all the better.

I don't know about single sided price but the best price I know of (for good
quality) for double sided is at:

barebonespcb.com

They accept the gerber files produced by the free gEDA tools, too.

http://www.geda.seul.org/

BTW, you might get more responses if you start a new thread with a new subject.

David Koski
RemoveMEdavidspamTakeThisOuTKosmosIsland.com

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-requestEraseMEspam.....mitvma.mit.edu

More... (looser matching)
- Last day of these posts
- In 2004 , 2005 only
- Today
- New search...