Exact match. Not showing close matches.
'[EE]: Source for IR-transparent plastic?'
Alan B. Pearce
>To avoid this problem you can sand the
>inner surface of the perspex slightly
>- that is what i do when i use IR-photobeam
The other trick is to scribe/saw a small groove between the transmitting and
receiving sensor points and fit a piece of black paper between the sensors,
and sitting/glued in the groove. This means the only reflection you get is
from the outer surface after the light has entered the plastic.
http://www.piclist.com hint: The list server can filter out subtopics
(like ads or off topics) for you. See http://www.piclist.com/#topics
More... (looser matching)
- Last day of these posts
- In 2002
, 2003 only
- New search...