Post by thread:[EE]: Schematics

This might be of interest for ideas for an odd circuit or 2. http://commlinx.com.au/schematics.htm -- Best regards Tony mICros http://www.bubblesoftonline.com spam_OUTsalesTakeThisOuTbubblesoftonline.com -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

At 04:53 PM 8/15/01 +1000, you wrote: >You know, the link works better with the 3 w`s in it . . . > >http://www.comlinkx.com.au/schematics.htm It doesn't work at all with the 'www' added. Best regards, =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Spehro Pefhany --"it's the network..." "The Journey is the reward" .....speffKILLspam@spam@interlog.com Info for manufacturers: http://www.trexon.com Embedded software/hardware/analog Info for designers: http://www.speff.com Contributions invited->The AVR-gcc FAQ is at: http://www.bluecollarlinux.com =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

Spehro Pefhany wrote: > > At 04:53 PM 8/15/01 +1000, you wrote: > >You know, the link works better with the 3 w`s in it . . . > > > >http://www.comlinkx.com.au/schematics.htm > > It doesn't work at all with the 'www' added. Third time around: Remove the 'k' http://www.commlinx.com.au/schematics.htm worth it. Quentin -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

>>You know, the link works better with the 3 w`s in it . . . >> >>http://www.comlinkx.com.au/schematics.htm >It doesn't work at all with the 'www' added. It works both ways for me, but then I'm using Internet Exploder 5 point something... -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

no, both ways don't work here. 'Server can't be found'. regards, Reelf "Alan B. Pearce" schrieb: {Quote hidden}> > >>You know, the link works better with the 3 w`s in it . . . > >> > >>http://www.comlinkx.com.au/schematics.htm > > >It doesn't work at all with the 'www' added. > > It works both ways for me, but then I'm using Internet Exploder 5 point > something... > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- SyWiTec * Systeme für Wissenschaft und Technik Bamberg & Monsees GbR Steindamm 22 * D-28719 Bremen Fon +49-421-646775 * Fax +49-421-646785 http://www.sywitec.de/ -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

I also get server not found, and this is using ie 5.0 sp2. Regards, Kat. ----- Original Message ----- From: "Reelf Monsees" <bam-monKILLspamEWETEL.NET> To: <.....PICLISTKILLspam.....MITVMA.MIT.EDU> Sent: Wednesday, August 15, 2001 8:17 PM Subject: Re: [EE]: Schematics no, both ways don't work here. 'Server can't be found'. regards, Reelf "Alan B. Pearce" schrieb: {Quote hidden}> > >>You know, the link works better with the 3 w`s in it . . . > >> > >>http://www.comlinkx.com.au/schematics.htm > > >It doesn't work at all with the 'www' added. > > It works both ways for me, but then I'm using Internet Exploder 5 point > something... > > -- > http://www.piclist.com hint: PICList Posts must start with ONE topic: > [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- SyWiTec * Systeme f|r Wissenschaft und Technik Bamberg & Monsees GbR Steindamm 22 * D-28719 Bremen Fon +49-421-646775 * Fax +49-421-646785 http://www.sywitec.de/ -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

> no, both ways don't work here. > 'Server can't be found'. > regards, > Reelf Ditto, all day, several tries. DNS Error every time > using Internet Exploder 5 point something Ditto. ???? -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

>You know, the link works better with the 3 w`s in it . . . > >http://www.comlinkx.com.au/schematics.htm > Perhaps, but it's even better when you remove the 'k'. :) Barry NEVER type a URL. ALWAYS cut and paste. -Murphy -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

At 09:29 AM 8/15/01 -0700, you wrote: >Try again from the start..... > >http://www.commlinx.com.au/schematics.htm > >(you need "www", you need TWO "mm" in commlinx, you need NO "k" in commlinx. > Actually works with and without the leading www. In case anyone still cannot get to it, I linked it on my site - in the category with about a dozen other circuit/schematics sites: http://www.oricomtech.com/teklink1.htm#Cir2 Note - I find that sometimes you have to punch "Refresh" to get a page to come up after the initial Error404/etc. [another IE5 goodie from GillBates ???]. - dan michaels ==================== -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

On Wed, 15 Aug 2001, Barry Gershenfeld wrote: > > NEVER type a URL. > ALWAYS cut and paste. > -Murphy Yapp ! and Windows will show you her blue face after that... http://www.commlinx.com.au/schematics.htm or http://commlinx.com.au/schematics.htm are not reachable addresses... Vasile -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

Vasile Surducan wrote: >http://www.commlinx.com.au/schematics.htm or >http://commlinx.com.au/schematics.htm > >are not reachable addresses... Vasile, both of these addresses work, however, I have found that they do not work the "first" time - produce the usual non-found error, but do work after hitting the "refresh" button. Another Bill Gates' IE5 gotcha? -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

Dan Michaels wrote: > > Vasile Surducan wrote: > > >http://www.commlinx.com.au/schematics.htm or > >http://commlinx.com.au/schematics.htm > > > >are not reachable addresses... > > Vasile, both of these addresses work, however, I have found > that they do not work the "first" time - produce the usual > non-found error, but do work after hitting the "refresh" > button. Another Bill Gates' IE5 gotcha? More likely a refresh from Cache (If you've been there before), or some broken javascript. I even tried Lynx, and had no success. It doesn't help that it isn't properly listed in the DNS tree. name.ualberta.ca can't find commlinx.com.au:Non-existent host/domain (subdomains without www -should- still be listed) However, using the IP address does work. Name: http://www.commlinx.com.au Address: 210.15.198.70 http://210.15.198.70/schematics.htm but there still is that funny refresh requirement. Once you get in, there are literally hundreds of project links to other sites. Robert -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

forwarded from Michael Brown [the science skeptic ;-)] ======================================================== At 01:44 PM 8/18/01 -0500, you wrote: {Quote hidden}>> Vasile, both of these addresses work, however, I have found >> that they do not work the "first" time - produce the usual >> non-found error, but do work after hitting the "refresh" >> button. Another Bill Gates' IE5 gotcha? > >Actually, it has to do with the way the DNS lookups work. The client sends >out the request and the replies don't start to flow in until after the >client times out. The next time a lookup occurs the information has been >cached in a server somewhere closer and gets returned in time. This is one >of the extremely rare times that Bill isn't to blame for "unreliable" >behavior. > -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email EraseMElistservspam_OUTTakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body