Searching \ for '[EE]: Re: Cheap Low Volume PCB Manufacturer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/pcbs.htm?key=pcb
Search entire site for: 'Re: Cheap Low Volume PCB Manufacturer'.

Exact match. Not showing close matches.
PICList Thread
'[EE]: Re: Cheap Low Volume PCB Manufacturer'
2001\06\11@071155 by Tim Forcer

flavicon
face
At Fri, 25 May 2001 15:17:48 +0100, Bob Simpson
<spam_OUTbobTakeThisOuTspamBOBSIMPSON.FREESERVE.CO.UK> wrote:

> My old source of making PCB's has just retired (lucky man) and now I need to
> find a good low quantity (20 to 30 off) PCB manufacturer in the UK.
>
> The boards are simple one or sometimes two sided no bigger than 14 x 10cm.
>
> Can anyone recommend one.

I strongly recommend PCB Pool, <http://www.pcb-pool.com/>.  Really good
value for money.  Available to folk throughout Europe - operations in
Germany and Ireland, reasonable postal delivery from either!

Tim Forcer
Department of Electronics & Computer Science
The University of Southampton, UK

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


2001\06\11@110843 by mike

flavicon
face
On Mon, 11 Jun 2001 12:12:46 +0100, you wrote:

>At Fri, 25 May 2001 15:17:48 +0100, Bob Simpson
><.....bobKILLspamspam@spam@BOBSIMPSON.FREESERVE.CO.UK> wrote:
>
>> My old source of making PCB's has just retired (lucky man) and now I need to
>> find a good low quantity (20 to 30 off) PCB manufacturer in the UK.
>>
>> The boards are simple one or sometimes two sided no bigger than 14 x 10cm.
>>
>> Can anyone recommend one.
>
>I strongly recommend PCB Pool, <http://www.pcb-pool.com/>.  Really good
>value for money.  Available to folk throughout Europe - operations in
>Germany and Ireland, reasonable postal delivery from either!
>
>Tim Forcer
>Department of Electronics & Computer Science
>The University of Southampton, UK
I've always had good service from ABL (near Hitchin I think), 01462
894312 - prices are reasonable, quality excellent -  but tooling can
make small runs (<10) a bit pricy. I've just sent off my first order
to PCB-Pool - it's nice to hear some good feedback!

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


2001\06\11@114550 by bob

flavicon
picon face
Many thanks to everyone who replied to this. I now not only know of one
supplier but can make a choice.

Thanks
Bob

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


More... (looser matching)
- Last day of these posts
- In 2001 , 2002 only
- Today
- New search...