Searching \ for '[EE]: RC servo connectors' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/io/servo/index.htm?key=servo
Search entire site for: 'RC servo connectors'.

Exact match. Not showing close matches.
PICList Thread
'[EE]: RC servo connectors'
2001\09\18@120752 by Sean H. Breheny

face picon face
Hi all,

I appreciate all your help in the past and I now have another question that
I am confident someone here can answer.

Someone I know has a damaged Airtronics 92185 RC 8-channel receiver, and
I'm helping him to find a replacement. I found a place which sells them,
but they told me there are two versions, one for the "old Airtronics
connector" and another for the "new Z or Futaba compatible connector". I'm
not sure which version I am replacing. The female servo connectors which
need to plug into this receiver have a flat side and a rounded side, so
that when you look at the end which accepts the pins, it can look like a D
or a backwards D. If you hold it to look like a backwards D (flat side to
the right) with the pin-holes facing you, the pinout from top to bottom is
positive, ground, signal.

Can anyone tell me which type of connectors I have? It sounds like Futaba
type pinout to me, but I'm puzzled in that the company I'm buying from says
that the version for the Z connector is actually called 92185Z, and this
receiver definitely says just 92185 (it actually says 92185/72, but I'm
assuming the 72 refers to the frequency range).

Thanks,

Sean

---------------------------------------------------------------
NetZero Platinum
Only $9.95 per month!
Sign up in September to win one of 30 Hawaiian Vacations for 2!
http://my.netzero.net/s/signup?r=platinum&refcd=PT97

--
http://www.piclist.com hint: To leave the PICList
spam_OUTpiclist-unsubscribe-requestTakeThisOuTspammitvma.mit.edu


2001\09\18@121922 by Quentin

flavicon
face
Sounds like you got the latest one.
Take the links from here:
http://www.vision.net.au/~timotsc/elecmod2.htm

Quentin

--
http://www.piclist.com hint: To leave the PICList
.....piclist-unsubscribe-requestKILLspamspam@spam@mitvma.mit.edu


2001\09\19@102656 by miked

flavicon
face
If from the outside edge it is V+,Gnd,Signal then it is the old style. If it is
Gnd,V+,Signal then it is the new Z type, compatible with Futaba/JR.
JR uses 2 beveled edges for keying, Futaba uses a beveled edge and a tab.
Airtronics FM receivers will work with JR FM transmitters(and vice-versa),
but not Futaba/Hitec.
May be more info at http://www.airtronics.net
{Quote hidden}

--
http://www.piclist.com hint: PICList Posts must start with ONE topic:
[PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads


More... (looser matching)
- Last day of these posts
- In 2001 , 2002 only
- Today
- New search...