Searching \ for '[EE]: Knobs' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=knobs
Search entire site for: 'Knobs'.

Exact match. Not showing close matches.
PICList Thread
'[EE]: Knobs'
2008\06\27@174649 by Marc Nicholas

picon face
I've been searching around for nice aluminum or plastic "metal" finish
control knobs for a project. ~1" diameter and a 6 or 6.25mm shaft would be
perfect. It seems many manufacturers don't make knobs for continuous
controllers? (i.e. without notches, lines, indents etc).

Anyone got a favourite knob supplier with a decent website?

TIA,

-marc

2008\06\28@140230 by M. Adam Davis

face picon face
www.marvac.com/detail.aspx?ID=25235
http://www.marvac.com/detail.aspx?ID=25236

-Adam

On Fri, Jun 27, 2008 at 5:46 PM, Marc Nicholas <spam_OUTgeekythingTakeThisOuTspamgmail.com> wrote:
> I've been searching around for nice aluminum or plastic "metal" finish
> control knobs for a project. ~1" diameter and a 6 or 6.25mm shaft would be
> perfect. It seems many manufacturers don't make knobs for continuous
> controllers? (i.e. without notches, lines, indents etc).
>
> Anyone got a favourite knob supplier with a decent website?
>
> TIA,
>
> -marc
> -

2008\06\28@180432 by Dave Lag

picon face
Marc Nicholas wrote:
> I've been searching around for nice aluminum or plastic "metal" finish
> control knobs for a project. ~1" diameter and a 6 or 6.25mm shaft would be
> perfect. It seems many manufacturers don't make knobs for continuous
> controllers? (i.e. without notches, lines, indents etc).
>
> Anyone got a favourite knob supplier with a decent website?
>
> TIA,
>
> -marc

http://apexjr.com/Sinks.htm
...
IIRC Spehro was selling some knobs a while back, Spehro?

2008\06\28@193618 by Spehro Pefhany

picon face
At 06:05 PM 6/28/2008, Dave Lag wrote:
>Marc Nicholas wrote:
>>I've been searching around for nice aluminum or plastic "metal" finish
>>control knobs for a project. ~1" diameter and a 6 or 6.25mm shaft would be
>>perfect. It seems many manufacturers don't make knobs for continuous
>>controllers? (i.e. without notches, lines, indents etc).
>>Anyone got a favourite knob supplier with a decent website?
>>TIA,
>>-marc
>
>http://apexjr.com/Sinks.htm
>..
>IIRC Spehro was selling some knobs a while back, Spehro?


server2.hostingplex.com/~zstoretr/trexon_knob_32mm_dwg.png
http://server2.hostingplex.com/~zstoretr/knob_32mm.jpg

Anodized machined black aluminum shell, lightweight, push-on for 6.0mm
(not 1/4" = 6.35mm) D-shaft. No marker line. Top quality.

2.00 USD ea. any quantity.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
.....speffKILLspamspam@spam@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com



2008\06\28@202421 by Mark Rages

face picon face
On 6/27/08, Marc Nicholas <geekythingspamKILLspamgmail.com> wrote:
> I've been searching around for nice aluminum or plastic "metal" finish
>  control knobs for a project. ~1" diameter and a 6 or 6.25mm shaft would be
>  perfect. It seems many manufacturers don't make knobs for continuous
>  controllers? (i.e. without notches, lines, indents etc).
>
>  Anyone got a favourite knob supplier with a decent website?
>
>  TIA,
>
>  -marc
>

Befriend someone with a hobby metal lathe.  Knobs are easy to make out
of brass or aluminum.

Regards,
Mark
markrages@gmail
--
Mark Rages, Engineer
Midwest Telecine LLC
.....markragesKILLspamspam.....midwesttelecine.com

More... (looser matching)
- Last day of these posts
- In 2008 , 2009 only
- Today
- New search...