Searching \ for '[EE]: ICSP' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/microchip/devprogs.htm?key=icsp
Search entire site for: 'ICSP'.

Exact match. Not showing close matches.
PICList Thread
'[EE]: ICSP'
2000\11\02@172334 by Tony Nixon

flavicon
picon face
Hi all,

Dan M has been very kind in helping recently - many many thanks :-), but
I thought I might be bugging a busy person too much.

Making this multy V verify programmer socket/ICSP port is proving to be
a bit of a teaser.

A simple interface circuit has been drawn up and tested, but I thought
the interface might work better with a 'stiffer' drive capabillity.

I sat down with Horowitz last night and came up with another idea,
albeit a little bit more complex.

The 74HC4049 works with 2V to 6V VCC but can accept input levels higher
than VCC (upto 15V). The only problem is the bi-directional data line.

The 7407 is open collector, and spare gates are available already.

If anyones interested, the 2 circuits are visible here...

http://www.picnpoke.com/circuit.gif

Any comments appreciated.

--
Best regards

Tony

mICro's
http://www.picnpoke.com
spam_OUTsalesTakeThisOuTspampicnpoke.com

--
http://www.piclist.com hint: To leave the PICList
.....piclist-unsubscribe-requestKILLspamspam@spam@mitvma.mit.edu




2000\11\02@193412 by Dan Michaels

flavicon
face
Tony Nixon wrote:

>If anyones interested, the 2 circuits are visible here...
>
>http://www.picnpoke.com/circuit.gif
>
>Any comments appreciated.


Hi Tony, not sure if you received my last msg offlist,
but maybe you can find a 3-state 'HC inverter, so you can
use the right-hand ckt, and do away with the pull-up
resistors, and get more drive that way.

- danM

--
http://www.piclist.com hint: To leave the PICList
piclist-unsubscribe-requestspamKILLspammitvma.mit.edu




More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...