Searching \ for '[EE:] Quad Flat Pack Lead Straighteners' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=quad+flat+pack+lead
Search entire site for: 'Quad Flat Pack Lead Straighteners'.

Exact match. Not showing close matches.
PICList Thread
'[EE:] Quad Flat Pack Lead Straighteners'
2005\04\05@171636 by Roberts II, Charles K.

picon face
Hello All

I am looking for a tool of some sort to straiten the leads on a 144 pin
Quad Flat Pack Part. It seems they were damaged in shipping. Any
suggestions on how to fix them would be great.




Charles K Roberts II



2005\04\05@172113 by Bob Axtell

face picon face
Roberts II, Charles K. wrote:

>Hello All
>
>I am looking for a tool of some sort to straiten the leads on a 144 pin
>Quad Flat Pack Part. It seems they were damaged in shipping. Any
>suggestions on how to fix them would be great.
>
>
>
>
>Charles K Roberts II
>
>
>
>  
>
Send them back. The manufacturer has machines that can do it right.

--Bob

--
Note: To protect our network,
attachments must be sent to
spam_OUTattachTakeThisOuTspamengineer.cotse.net .
1-866-263-5745 USA/Canada
http://beam.to/azengineer

2005\04\05@173123 by Spehro Pefhany

picon face
At 05:16 PM 4/5/2005 -0400, you wrote:
>Hello All
>
>I am looking for a tool of some sort to straiten the leads on a 144 pin
>Quad Flat Pack Part. It seems they were damaged in shipping. Any
>suggestions on how to fix them would be great.
>
>Charles K Roberts II

A bit of bending you can fix with some fine tweezers and some patience, but
keep in mind that the leads have an irritating habit of snapping off right at
the package. It's probably safer to discard the part and get a fresh one
rather than risking your PCB unless you have access to good rework equipment.

Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the reward"
.....speffKILLspamspam@spam@interlog.com             Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog  Info for designers:  http://www.speff.com




More... (looser matching)
- Last day of these posts
- In 2005 , 2006 only
- Today
- New search...