Post by thread:[EE:] MEMS Gyroscopes (was [EE:]GPS vs LPS)

Try www.analog.com/Analog_Root/sitePage/productCategoryTree/0,2142,level4 %253D%25252D1%2526level1%253D212%2526level2%253D310%2526level3%253D%25252D1% 2526lind%253D0,00.html Messy I know, either that or go to http://www.analog.com, and select "Product category tree" from the Design Resources combo box, and then select MEMS Gyroscopes. > {Original Message removed}

Liam O'Hagan <spam_OUTPICLISTTakeThisOuTmitvma.mit.edu> wrote: > Try > www.analog.com/Analog_Root/sitePage/productCategoryTree/0,2142, > level4 > %253D%25252D1%2526level1%253D212%2526level2%253D310%2526level3%253D%25 > 252D1% 2526lind%253D0,00.html > > Messy I know, either that or go to http://www.analog.com, and select > "Product category tree" from the Design Resources combo box, and > then select MEMS Gyroscopes. Or use tinyurl.com and replace it all with: http://tinyurl.com/urnc -Andy === Andrew Warren -- .....aiwKILLspam@spam@cypress.com === Principal Design Engineer === Cypress Semiconductor Corporation === === Opinions expressed above do not === necessarily represent those of === Cypress Semiconductor Corporation -- http://www.piclist.com hint: To leave the PICList piclist-unsubscribe-requestKILLspammitvma.mit.edu

> Liam O'Hagan <.....PICLISTKILLspam.....mitvma.mit.edu> wrote: > Or use tinyurl.com and replace it all with: > > http://tinyurl.com/urnc I've seen these and they seem nice. You can get an evaluation board for $50, which is quite reasonable. The main problem with these chips is that they are BGA, which makes them rather difficult to solder. -- D. Jay Newman ! EraseMEjayspam_OUTTakeThisOuTsprucegrove.com ! Xander: Giles, don't make cave-slayer unhappy. http://enerd.ws/robots/ ! -- http://www.piclist.com hint: To leave the PICList piclist-unsubscribe-requestspam_OUTmitvma.mit.edu

You will find that MEMs gyroscopes probably drift rather more than you would wish if you want to do position detection for more than a few seconds. RM Subject: Re: [PICLIST] [EE:] MEMS Gyroscopes (was [EE:]GPS vs LPS) {Quote hidden}> > Liam O'Hagan <@spam@PICLISTKILLspammitvma.mit.edu> wrote: > > > Or use tinyurl.com and replace it all with: > > > > http://tinyurl.com/urnc > > I've seen these and they seem nice. You can get an evaluation board for > $50, which is quite reasonable. > > The main problem with these chips is that they are BGA, which makes them > rather difficult to solder. -- http://www.piclist.com hint: To leave the PICList KILLspampiclist-unsubscribe-requestKILLspammitvma.mit.edu

How in the h*** do you solder a ball grid array in a home shop? Is reflow the only choice? (Warning: do not ignite the dreaded toaster oven thread.) -- Lawrence Lile "D. Jay Newman" <RemoveMEjayTakeThisOuTSPRUCEGROVE.COM> Sent by: pic microcontroller discussion list <spamBeGonePICLISTspamBeGoneMITVMA.MIT.EDU> 11/12/2003 04:44 PM Please respond to pic microcontroller discussion list To: TakeThisOuTPICLISTEraseMEspam_OUTMITVMA.MIT.EDU cc: Subject: Re: [EE:] MEMS Gyroscopes (was [EE:]GPS vs LPS) > Liam O'Hagan <RemoveMEPICLISTTakeThisOuTmitvma.mit.edu> wrote: > Or use tinyurl.com and replace it all with: > > http://tinyurl.com/urnc I've seen these and they seem nice. You can get an evaluation board for $50, which is quite reasonable. The main problem with these chips is that they are BGA, which makes them rather difficult to solder. -- D. Jay Newman ! jayEraseME.....sprucegrove.com ! Xander: Giles, don't make cave-slayer unhappy. http://enerd.ws/robots/ ! -- http://www.piclist.com hint: To leave the PICList EraseMEpiclist-unsubscribe-requestmitvma.mit.edu -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

--- Liam O'Hagan <RemoveMEliamEraseMEEraseMEGLI.COM.AU> wrote: > Try > www.analog.com/Analog_Root/sitePage/productCategoryTree/0,2142,level4 > %253D%25252D1%2526level1%253D212%2526level2%253D310%2526level3%253D%25252D1% > 2526lind%253D0,00.html Crikey! Now _that's_ what I call a URL. :)) Debbie :) http://personals.yahoo.com.au - Yahoo! Personals New people, new possibilities. FREE for a limited time. -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

> How in the h*** do you solder a ball grid array in a home shop? Is reflow > the only choice? > "D. Jay Newman" <RemoveMEjayspam_OUTKILLspamSPRUCEGROVE.COM> > Sent by: pic microcontroller discussion list <RemoveMEPICLISTTakeThisOuTspamMITVMA.MIT.EDU> > I've seen these and they seem nice. You can get an evaluation board for > $50, which is quite reasonable. The evaluation boards have the chip pre-soldered. Or socketed. In other words, they are easier to deal with then the raw boards. -- D. Jay Newman ! EraseMEjayspamspamBeGonesprucegrove.com ! Xander: Giles, don't make cave-slayer unhappy. http://enerd.ws/robots/ ! -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

try http://tinyurl.com it saves an awful lot of wrapping problems -----Original Message----- From: Debbie Hynes [RemoveMEdebbiehynes2002KILLspamYAHOO.COM.AU] Sent: 13 November 2003 16:36 To: PICLISTSTOPspamspam_OUTMITVMA.MIT.EDU Subject: Re: [EE:] MEMS Gyroscopes (was [EE:]GPS vs LPS) --- Liam O'Hagan <spamBeGoneliamSTOPspamEraseMEGLI.COM.AU> wrote: > Try > http://www.analog.com/Analog_Root/sitePage/productCategoryTree/0,2142,level4 > %253D%25252D1%2526level1%253D212%2526level2%253D310%2526level3%253D%25252D1% > 2526lind%253D0,00.html Crikey! Now _that's_ what I call a URL. :)) Debbie :) http://personals.yahoo.com.au - Yahoo! Personals New people, new possibilities. FREE for a limited time. -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads