Post by thread:[BUY]: Simple programmer via ICD2 connector

I'm currently using a Microchip ICD2 for programming and debugging for a standalone project we're working on. We'd like to be able to do field upgrading via the same connection (ICD2 RJ-11 connector) on the board. The default option is for field technicians to use the ICD2. However, all we need to do is program. What third party programmer only solutions are available that uses the ICD2 of connection? I'd like to find something more economical and easier to use than MPLAB. Thanks, Matt -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

On Thursday 17 April 2003 07:50 am, Matt Verminski wrote: > I'm currently using a Microchip ICD2 for programming and debugging > for a standalone project we're working on. We'd like to be able to > do field upgrading via the same connection (ICD2 RJ-11 connector) > on the board. > > The default option is for field technicians to use the ICD2. > However, all we need to do is program. What third party programmer > only solutions are available that uses the ICD2 of connection? I'd > like to find something more economical and easier to use than > MPLAB. It looks as if the Fobbit may have the same connector; I'd write them and ask. http://www.avion.com.au/products/programmers/pic/fobbit/ -- Ned Konz http://bike-nomad.com GPG key ID: BEEA7EFE -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads