Searching \ for '[AVR]: Reading EEPROM when lockbits are set ?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/mems.htm?key=eeprom
Search entire site for: 'Reading EEPROM when lockbits are set ?'.

Exact match. Not showing close matches.
PICList Thread
'[AVR]: Reading EEPROM when lockbits are set ?'
2003\06\18@055259 by Reelf Monsees

flavicon
face
Hi,
we have to service a device containing a AT90S1200. Unfortunately, there is no documentation at all. The relevant information is
stored in the EEPROM of the controller, program-data doesn't matter for
us as we have write a new program anyway. As both lockbits are set, reading the EEPROM with a programmer is not
possible (or is it?). So we could write a program for the 90S1200
that transmits the data from the EEPROM trough one pin serially.
But there doesn't seem to be a way to erase and rewrite the program-
memory without erasing the EEPROM as well (or is there ?).
If anybody comes up with an idea, that would be great !

regards,
   Reelf
-- SyWiTec *  Systeme für Wissenschaft und Technik
            Bamberg & Monsees GbR
        Steindamm 22 * D-28719 Bremen
  Fon +49-421-646775 * Fax +49-421-646785
            http://www.sywitec.de/

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

More... (looser matching)
- Last day of these posts
- In 2003 , 2004 only
- Today
- New search...