Post by thread:[AVR]: Programmer

Hi, Where I can find an free AVR programmer on the net? Is there any difference between PIC and AVR in terms of there application? _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! use spam_OUTlistservTakeThisOuTmitvma.mit.edu?body=SET%20PICList%20DIGEST

> Hi, > > Where I can find an free AVR programmer on the net? Is there any difference > between PIC and AVR in terms of there application? > http://www.atmel.com/atmel/products/prod203.htm Get astudio3.exe and asmpack.exe for Win applications. I have them but don't actually use these. I use a small program called fbprg.exe that I don't think is at the Atmel site. It's a 3rd party DOS program that you can use with Notepad and a very simple programmer board. Quick and easy to use. I'll send you that and the programmer schematic off-list -- http://www.piclist.com hint: To leave the PICList .....piclist-unsubscribe-requestKILLspam@spam@mitvma.mit.edu

> http://www.atmel.com/atmel/products/prod203.htm > > Get astudio3.exe and asmpack.exe for Win applications. I have them > but don't actually use these. I use a small program called fbprg.exe > that I don't think is at the Atmel site. It's a 3rd party DOS program that > you can use with Notepad and a very simple programmer board. Quick > and easy to use. I'll send you that and the programmer schematic off-list Sorry, slight case of perjury. I did use asmpack - it's a self-extracting file that, amongst other things, contains wavrasm.exe version 1.30, which you need to assemble text into the hex file. I haven't yet needed to use astudio.exe, which is a simulator -- http://www.piclist.com hint: To leave the PICList piclist-unsubscribe-requestKILLspammitvma.mit.edu

More on the Dark Side - Simple programmer and fbprg.exe (it's also a Ham Radio page, may be of interest to people who like Ham Radio pages) http://member.netease.com/~tominfo/index.htm Another simple programmer which is Win-based and can also program the 8-pin AT22Tiny http://jaichi.virtualave.net/avr-prog-e.htm Other programmers, which require more parts, plus lots of other information (beginners, projects, news etc) at http://www.ipass.net/~hammill/newavr.htm -- http://www.piclist.com hint: To leave the PICList .....piclist-unsubscribe-requestKILLspam.....mitvma.mit.edu

At 01:43 AM 11/13/00 +1300, Jinx wrote: >More on the Dark Side - > >Simple programmer and fbprg.exe (it's also a Ham Radio page, >may be of interest to people who like Ham Radio pages) > >http://member.netease.com/~tominfo/index.htm As it happens, I needed a chip programmer yesterday, because I couldn't use my in-circuit programmer. I built this one in about 10 minutes, and it works great. All parts from radio shack. I used a small project PCB, inserted between the pins of the DB25M connector, so the whole thing just plugs into my laptop's paralell port. I haven't had such a nice, simple, and powerful project, since my first crystal radio :) Also, his software is very well written, easy to understand. Pop over to the AVR group at egroups.com, and you can download my "getting started" code for the 8515. It's adaptable to other processors in the AVR line. -- Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9 -- http://www.piclist.com hint: To leave the PICList EraseMEpiclist-unsubscribe-requestspam_OUTTakeThisOuTmitvma.mit.edu

> >Simple programmer and fbprg.exe (it's also a Ham Radio page, > >may be of interest to people who like Ham Radio pages) > > > >http://member.netease.com/~tominfo/index.htm > > > As it happens, I needed a chip programmer yesterday, because I couldn't use > my in-circuit programmer. > > I built this one in about 10 minutes, and it works great. Reading that was a nice start to the day -- http://www.piclist.com hint: To leave the PICList piclist-unsubscribe-requestspam_OUTmitvma.mit.edu

>Reading that was a nice start to the day For me too! I've read about it before, but I never needed to build it till now. I've been trying to drag the local hams into the 19th century, exposing them to SMD soldering (with normal hand tools) and microcontrollers. I think this one is a killer for that audience. Cheap, easy, works great, and all the parts available at Radio Shack. :) The Dark Side is always near.. -- Where's dave? http://www.findu.com/cgi-bin/find.cgi?kc6ete-9 -- http://www.piclist.com hint: To leave the PICList @spam@piclist-unsubscribe-requestKILLspammitvma.mit.edu

Thank you. ----- Original Message ----- From: Jinx <KILLspamjoecolquittKILLspamCLEAR.NET.NZ> To: <RemoveMEPICLISTTakeThisOuTMITVMA.MIT.EDU> Sent: Saturday, November 11, 2000 11:39 PM Subject: Re: [AVR]: Programmer > > www.atmel.com/atmel/products/prod203.htm > > > > Get astudio3.exe and asmpack.exe for Win applications. I have them > > but don't actually use these. I use a small program called fbprg.exe > > that I don't think is at the Atmel site. It's a 3rd party DOS program that > > you can use with Notepad and a very simple programmer board. Quick > > and easy to use. I'll send you that and the programmer schematic off-list {Quote hidden}> > Sorry, slight case of perjury. I did use asmpack - it's a self-extracting > file that, amongst other things, contains wavrasm.exe version 1.30, which > you need to assemble text into the hex file. I haven't yet needed to use > astudio.exe, which is a simulator > > -- > http://www.piclist.com hint: To leave the PICList > spamBeGonepiclist-unsubscribe-requestspamBeGonemitvma.mit.edu > > > _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- http://www.piclist.com hint: To leave the PICList TakeThisOuTpiclist-unsubscribe-requestEraseMEspam_OUTmitvma.mit.edu