Searching \ for '[AVR]: AVRISP & Windows XP?' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: www.piclist.com/techref/index.htm?key=avrisp+windows
Search entire site for: 'AVRISP & Windows XP?'.

Exact match. Not showing close matches.
PICList Thread
'[AVR]: AVRISP & Windows XP?'
2003\08\12@135122 by Marcelo Puhl

flavicon
face
       Hi,
       Is there a way to make AVRISP work on Windows XP with
a Kanda programmer?  A friend of mine are trying that but
it only works one of ten times...

       Thanks.
       Mark

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

2003\08\12@135737 by David VanHorn

flavicon
face
At 02:51 PM 8/12/2003 -0300, Marcelo Puhl wrote:

>        Hi,
>        Is there a way to make AVRISP work on Windows XP with
>a Kanda programmer?  A friend of mine are trying that but
>it only works one of ten times...

You mean you're trying to drive an AVRISP programmer with Kanda software?

Why not use studio 3.x or 4.x? They work just fine.
Set the clock rate down a bit for reliability.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

2003\08\12@144404 by Marcelo Puhl

flavicon
face
       My friend is using the Atmel AVR ISP software. The programmer is
connected to the PC paralel port and has a 74HC244 driving the AVR.
       This setup work 100% on W98 but just 10% on XP :(

       I'll recommend he install AVR Studio.

       Thanks.
       Mark


On 12 Aug 2003 at 12:55, David VanHorn wrote:

{Quote hidden}

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

2003\08\12@144817 by David VanHorn

flavicon
face
At 03:42 PM 8/12/2003 -0300, Marcelo Puhl wrote:

>        My friend is using the Atmel AVR ISP software. The programmer is
>connected to the PC paralel port and has a 74HC244 driving the AVR.
>        This setup work 100% on W98 but just 10% on XP :(
>
>        I'll recommend he install AVR Studio.

I don't know if Studio can drive that hardware.
the AVRISP runs through the serial port.

XP usually prevents you from accessing the parallel port directly.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.

2003\08\13@005459 by BryanW

flavicon
face
Marcelo Puhl wrote:
>         Hi,
>         Is there a way to make AVRISP work on Windows XP with
> a Kanda programmer?  A friend of mine are trying that but
> it only works one of ten times...
>
>         Thanks.
>         Mark
>
> --
> http://www.piclist.com hint: The PICList is archived three different
> ways.  See http://www.piclist.com/#archives for details.
>
>

Hi,

If the software version is v2.65 then the software was made for older
win98 and lower OS versions. Some people have sucessfully made it work
with NT based systems but...

There is an upgrade for the software available at the http://www.kanda.com
website. Kanda's products are now owned by Embedded Results Ltd. If you
select In System Programming and then AVR the upgrade is listed there.
It costs 12USD by email, and works with XP.

We also do PIC programmers if anyone would like a browse :)

Thanks

Bryan (Software Engineer - Embedded Results Lrd)

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email spam_OUTlistservTakeThisOuTspammitvma.mit.edu with SET PICList DIGEST in the body

2003\08\13@070239 by Sten Dahlgren

flavicon
face
David VanHorn wrote:

> At 03:42 PM 8/12/2003 -0300, Marcelo Puhl wrote:
>
>
>>       My friend is using the Atmel AVR ISP software. The programmer is
>>connected to the PC paralel port and has a 74HC244 driving the AVR.
>>       This setup work 100% on W98 but just 10% on XP :(
>>
>>       I'll recommend he install AVR Studio.
>>
>
> I don't know if Studio can drive that hardware.
> the AVRISP runs through the serial port.
>
> XP usually prevents you from accessing the parallel port directly.
>

I'm useing the WinAVR collection with gcc and avrdude as the programmer
and it is working with my stk200 dongle in XP without any problems at all.

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email .....listservKILLspamspam@spam@mitvma.mit.edu with SET PICList DIGEST in the body

2003\08\13@184402 by Liam O'Hagan

flavicon
face
Likewise my dontronics dt006 works perfectly with the parallel port and
windows XP...

{Quote hidden}

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email listservspamspam_OUTmitvma.mit.edu with SET PICList DIGEST in the body

More... (looser matching)
- Last day of these posts
- In 2003 , 2004 only
- Today
- New search...