Post by thread:[AD] Multiprotocol OBD-II ECU Simulator

<<http://www.obd2cables.com/products/index.php/obdii-equipment/simulators/multi-protocol-ecu-simulator-with-12v-power-supply.html>> - Supports all OBD-II protocols (up to three simultaneously) - Five user-adjustable parameters (Coolant, RPM, Speed, O2 voltage, MAF) - Bus traffic monitoring through USB or Bluetooth (currently, only available on CAN) If you are interested in purchasing the unit, and would like to receive a discount code, please write me off-list. Unique product, limited quantity on hand, not available in stores. :-) Vitaliy

Vitaliy wrote: > <<http://www.obd2cables.com/products/index.php/obdii-equipment/simulators/multi-protocol-ecu-simulator-with-12v-power-supply.html>> > > - Supports all OBD-II protocols (up to three simultaneously) > - Five user-adjustable parameters (Coolant, RPM, Speed, O2 voltage, MAF) > - Bus traffic monitoring through USB or Bluetooth (currently, only > available > on CAN) > > If you are interested in purchasing the unit, and would like to receive a > discount code, please write me off-list. The link above no longer works, here's a new one: http://www.ECUsims.com Upcoming features include: - User upgradeable firmware (bootloader) - Support for multiple ECUs (in the same PIM) - PC configuration utility: * Add/remove ECUs * Add/remove PIDs (Mode 01) * Add/remove Freeze Frames (generic and mfr. specific) * Add/remove DTCs (stored, pending, and permanent) * Set ECU attributes (VIN, CAL IDs, name) * Set In-use Performance Tracking (IPT) parameters * Set supported/completed monitors (Mode 01, PID 01) * Assign any knob to any ECU/PID, range of values is user definable * Assign MIL button/LED to any ECU(s) * Save/retrieve configuration files