Exact match. Not showing close matches.
'[AD] FS/FT: Mega LaserStar A4 PCB transparency fil'
I have two unopened (and one open and part-used) packs of Mega
Electronics "LaserStar" film. This is a matt-surface plastic film which
is used in a laser printer to produce transparencies suitable for
exposing photoresist-coated PCBs.
The catch is, I have a fancy new printer which doesn't have a "toner
density" adjustment. In fact, even when set to "transparency, maximum
darkness" it puts very little toner down on the page. This is great for
toner economy... but naff all use when you want a jet black print (the
inkjet does a far better job).
Is anyone interesting in either buying this stuff from me (I have two
unopened packs which came from Rapid, and one opened pack which came
from Farnell) or swapping it for a pack or two of JetStar or JetStar
Any reasonable offer accepted -- I think I paid about £10 a pack for it,
and there are ten A4 sheets in each cardboard pack.
Have you tried running the same sheet through several times?
On Sun, Mar 18, 2012 at 3:42 PM, Philip Pemberton <philpem.me.uk> wrote: piclist
On Fri, 2012-03-23 at 13:15 -0400, Sean Breheny wrote:
> Have you tried running the same sheet through several times?
My experience is the sheets never line up exactly the same, and if you
have any fine detail it will be obliterated.
More... (looser matching)
- Last day of these posts
- In 2012
, 2013 only
- New search...