Sorry, hit SEND too soon.

Harold Hallikainen <PICLISTSTOPspamEraseMEmitvma.mit.edu> wrote:

> THANKS Andrew! This is an embedded system that currently uses a
> laptop to configure the system thru EIA232. The customer is looking
> at porting the configuration code over to PDAs and USB. Our box and
> the PDA have to figure out who's in control.

   They only need to figure that out if they're BOTH On-The-Go
   devices; if you know that your PDA will always have a USB host
   port, your box just needs a standard USB device controller.
   Similarly, if you know that the PDA will always have a USB device
   port, you'll need a host-capable chip in your box (the EZ-OTG
   chip will work fine), but you won't have to do any of the OTG
   negotiation.

   -Andy

=== Andrew Warren -- spamBeGoneaiwSTOPspamRemoveMEcypress.com
=== Principal Design Engineer
=== Cypress Semiconductor Corporation
===
=== Opinions expressed above do not
=== necessarily represent those of
=== Cypress Semiconductor Corporation

--
http://www.piclist.com#nomail Going offline? Don't AutoReply us!
email .....listserv.....TakeThisOuTmitvma.mit.edu with SET PICList DIGEST in the body

month overview.

new search...