>
> I've done some more testing and this is what i've found.
>
> If I configure PORTC as output and drive pin 6 (TX) high/low, I still get
> the 0.7V, however if I write to the whole port ie. PORTC = 0xFF, I get a
> nice 5V high signal.
>
> any ideas??
>
> cheers
> damo
>
> Damien Kee
> 3rd Year Electrical Engineering
> University of Queensland
> RemoveMEs369472EraseME@spam@student.uq.edu.au
>
> --
> http://www.piclist.com hint: To leave the PICList
> spamBeGonepiclist-unsubscribe-request.....mitvma.mit.edu