Veronica Merryfield email (remove spam text)
I am hoping someone might be able to give me some pointers to look for...
I designed an audio and PSU board for client some time ago. The first two build batches worked fine but the third build has about a 50% failure rate, and I have them all here to try and find a fix :( The failure is SMPSU noise on the audio. The noise mostly disappears if I push on the board with a small wooden stick on or under one of the regulators, either the LT1617 or the LM2676. Since the first two batches were fine, I am currently assuming that the PCB or the assembly is at fault in some way but I can not see where..
Has anyone had anything similar and found a solution?
In reply to: <CAEBHKafCzLd_3jTdC1DpnoDABaGfa08O6PaVROsn1Hwg+=J5Rw@mail.gmail.com>
See also: www.piclist.com/techref/index.htm?key=perplexed
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the