Anybody using Siemens MC35 and PIC ?
Jinx email (remove spam text)
> >AFAICT the hardware manual has the polarity of /RING0 wrong
> It should be active low, so that the RS-232 RI line pulses positive
> when a call is received. It's a good line to connect to an /INT pin
As far as I can determine, /RING0, on this unit, is active high. ie it's
normally low and goes high for those conditions you mention. I thought
at first this was due to differences between the TC35 (the actual
cellular engine) and the MC35, which is a TC35+interface, but the
description is in the interface manual, so ???? Anyway, it's hooked
up to INT1 with a rising edge detect and seems to work alright
That's not to say I'm running it on deficient commands that someone
at Siemens will tell me "makes it work upside-down" !!
Cheers for the errors/fixes mentioned. I've a collection of those too.
It's quite disappointing and means silly extra work
http://www.piclist.com hint: The PICList is archived three different
ways. See http://www.piclist.com/#archives for details.
See also: www.piclist.com/techref/microchip/devices.htm?key=pic
You must be a member of the
piclist mailing list
(not only a www.piclist.com member) to post to the