prev: format conversion -- next: PWB layers
Stock (copper clad board)
FREE PCBs! Enter the PICList design contest to win a free PCB from olimex.com!
(see also the more general bibliography for schematic editor )
If you're using a PWB layout editor, you might want to look at these items: "Design for Manufacturing"
[Any other must-have, highly recommended books ?]
[FIXME: point to other mailing list and Usenet newsgroups: ... PIClist with the [EE] topic, comp.arch.embedded, ... ]
[FIXME: merge with bibliography ?] [FIXME: split into seperate CAD-independent FAQ ?]
consider joining a pwb design mailing list .
From: Brooks Bill Sent: Wednesday, August 02, 2000 11:10 AM Subject: RE: [PROTEL EDA USERS]: Advice on Learning PCB Design
Andy... I am trying to put together a website to address this very issue... It's still under construction but you may find some of what you are looking for under 'education' in the Navigation menu on the left side of the page. Here's the link - http://home.fda.net/bbrooks/pca/pca.htm
I will be adding more to it as time goes on... make sure to check back often.Bill Brooks Senior PCB Designer Zoneworx, Inc. 40925 County Center Drive, STE 200 Temecula, CA 92591 http://www.zoneworx.com Tel: (909) 296-1226 x 1037 Co-Director / Education Officer / Webmaster for the San Diego Chapter of the IPC Designers Council http://www.ipc.org/SanDiego/
A few general PWB design tips (general design):
Dave Lewis suggests on 2001-05-23 06:10:46 PM
Net Names on all Power Symbols
Use the "little arrow thingy" power object, enter the net name as required, and then place it upside down. Viola! It looks like a little ground symbol with the net name displayed. My printouts are legible and I really like being able to see the assigned net name for the ground. I have since given up on using all those other cute symbols (ie. the ones that don't display the net name) mostly because they can be assigned to ANY net so you really don't know for sure at a glance. For bias nets I like the bar do-dad. - Dave Lewis
See "avoiding noises"@.
V Scoring (moved to Cutting PCB Stock)
|file: /Techref/pcbs.htm, 16KB, , updated: 2018/10/11 15:03, local time: 2018/12/9 12:46,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/pcbs.htm?key=smt"> Printed Circuit Boards</A>
|Did you find what you needed? "smt"|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181209 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Neil, Isaac M. Bavaresco, Bob Blick, Harold Hallikainen, AB Pearce - UKRI STFC, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!