pcb etch new200911

 

ON 20091105@9:53:25 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/pcb/etch/t20-sa.htm#40121.1736111111
James Newton[JMN-EFP-786] published post 40121.1736111111' but after: '<A TITLE="'.



ON 20091110@11:28:32 AM at page:
On a web page you were interested in at:
http://techref.massmind.org/pcb/etch/t20-sa.htm#40126.2583912037
James Newton[JMN-EFP-786] published post 40126.2583912037' but after: '<A TITLE="'.



ON 20091123@3:24:31 PM at page:
On a web page you were interested in at:
http://techref.massmind.org/pcb/etch/t20-sa.htm#40138.9650231482
James Newton[JMN-EFP-786] removed post 40138.9650231482

|Delete '

   <LI>'

file: /Techref/pcb/etch/new200911.txt, 1KB, , updated: 2009/11/23 15:24, local time: 2012/2/10 04:20,

^{38.107.179.233:LOG IN}

©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE! /

<A HREF="http://www.piclist.com/techref/pcb/etch/new200911.txt"> pcb etch new200911</A>

Did you find what you needed?

Stepper motors CAN be smooth! And stepper controllers can be strong and cheap. Roman Black's Linistep stepper controller kits:

o 18th microstep
o Linear smoothing

o Open source
o Full kit $25!