ADAPTER_STATUS info  Overview  Group

The ADAPTER_STATUS structure contains information about a network adapter. This structure is pointed to by the ncb_buffer member of the NCB structure. ADAPTER_STATUS is followed by as many NAME_BUFFER structures as required to describe the network adapters on the system.

typedef struct _ADAPTER_STATUS { // adptst 

    UCHAR   adapter_address[6]; 

    UCHAR   rev_major; 

    UCHAR   reserved0; 

    UCHAR   adapter_type; 

    UCHAR   rev_minor; 

    WORD    duration; 

    WORD    frmr_recv; 

    WORD    frmr_xmit; 

    WORD    iframe_recv_err; 

    WORD    xmit_aborts; 

    DWORD   xmit_success; 

    DWORD   recv_success; 

    WORD    iframe_xmit_err; 

    WORD    recv_buff_unavail; 

    WORD    t1_timeouts; 

    WORD    ti_timeouts; 

    DWORD   reserved1; 

    WORD    free_ncbs; 

    WORD    max_cfg_ncbs; 

    WORD    max_ncbs; 

    WORD    xmit_buf_unavail; 

    WORD    max_dgram_size; 

    WORD    pending_sess; 

    WORD    max_cfg_sess; 

    WORD    max_sess; 

    WORD    max_sess_pkt_size; 

    WORD    name_count; 

} ADAPTER_STATUS; 

 

Members

adapter_address

Specifies encoded address of the adapter.

rev_major

Specifies the major software-release level. This value is 3 for IBM NetBIOS 3. x.

reserved0

Reserved. This value is always zero.

adapter_type

Specifies the adapter type. This value is 0xFF for a Token Ring adapter or 0xFE for an Ethernet adapter.

rev_minor

Specifies the minor software-release level. This value is zero for IBM NetBIOS x.0.

duration

Specifies the duration of the reporting period, in minutes.

frmr_recv

Specifies the number of FRMR frames received.

frmr_xmit

Specifies the number of FRMR frames transmitted.

iframe_recv_err

Specifies the number of I frames received in error.

xmit_aborts

Specifies the number of aborted transmissions.

xmit_success

Specifies the number of successfully transmitted packets.

recv_success

Specifies the number of successfully received packets.

iframe_xmit_err

Specifies the number of I frames transmitted in error.

recv_buff_unavail

Specifies the number of times a buffer was not available to service a request from a remote computer.

t1_timeouts

Specifies the number of times that the DLC T1 timer timed out.

ti_timeouts

Specifies the number of times that the ti inactivity timer timed out.The ti timer is used to detect links that have been broken.

reserved1

Reserved. This value is always zero.

free_ncbs

Specifies the current number of free network control blocks.

max_cfg_ncbs

Undefined for IBM NetBIOS 3.0.

max_ncbs

Undefined for IBM NetBIOS 3.0.

xmit_buf_unavail

Undefined for IBM NetBIOS 3.0.

max_dgram_size

Specifies the maximum size of a datagram packet. This value is always at least 512 bytes.

pending_sess

Specifies the number of pending sessions.

max_cfg_sess

Specifies the configured maximum pending sessions.

max_sess

Undefined for IBM NetBIOS 3.0.

max_sess_pkt_size

Specifies the maximum size of a session data packet.

name_count

Specifies the number of names in the local names table.

See Also

NAME_BUFFER, NCB

PICList 2024 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .