TITLE "Example on using RS_bodySEND, RS_bodyRECEIVE macros" ;------------------------------------------------------------ ; Copyright: Eugene M. Hutorny © 2003,eugene@ksf.kiev.ua ; Revision: V0.01 ; Date: Feb 25, 2003 ; Assembler: MPASM version 3.20.07 ;------------------------------------------------------------ ; Example on using RS_bodySEND, RS_bodyRECEIVE macros ;------------------------------------------------------------ include "p16f84a.inc" include "rs.inc" #define CLOCK .4000000 #define RX PORTB,0 ; RX Pin, RB0, input #define TX PORTB,1 ; TX Pin, RB1, output #define CTS PORTB,2 ; CTS pin, RB2, output #define RTS PORTB,6 ; RTS pin, RB6, input #define RS_BITCOUNT .8 #define RS_BUFFSIZE .16 UDATA TMP_WREG res 1 ; temporary storage for WREG TMP_STATUS res 1 ; - " - STATUS RS_DATA res 1 ; file register used in RS RS_COUNT res 1 ; bit counter RS_ALIGN res 1 ; alignment bits RS_COUNTER res 1 ; recieved/echoed counter RS_BUFFER res RS_BUFFSIZE ; data buffer nope macro ; nop 2 cycles long goto $+1 endm RS CODE RS_SEND RS_bodySEND .115200, RS_BITCOUNT, TX, 0 return ;--------------------------------------------------------------------------- RS_READBUFF ; READ incoming data to buffer bcf INTCON, INTF bsf INTCON, INTE bsf INTCON, GIE bcf CTS ; transmission shall begin clrf TMR0 ; clear timer bcf INTCON, T0IF ; clear timer expiration flag rx clrwdt btfsc RTS ; is RTS kept SPACE goto suspend ; no, suspend reception tstf RS_COUNTER ; test is something received skpnz goto rx ; if no bytes yet received, just wait btfsc INTCON, T0IF ; if timer expired goto suspend ; suspend reception tstf RS_COUNTER ; test RS_COUNTER skpnz ; if( RS_COUNTER > 0) goto rx ; continue reception suspend bsf CTS ; request suspending reception clrf TMR0 ; clear timer ; relaxation period after last byte recived xr clrwdt movlw RS_BUFFSIZE - 1 subwf RS_COUNTER, W ; RS_COUNTER - (RS_BUFFSIZE - 1) skpnc ; if( RS_COUNTER - (RS_BUFFSIZE - 1) > 0) goto readdone btfsc RTS ; wait if space is kept SPACE goto readdone btfss TMR0, 2 ; time out = 4 timer ticks (1024 IC) ~ 1 ms, good for fast PC's goto xr readdone bcf INTCON, GIE bcf INTCON, INTE ; disable INT interrupt return RS_INTERRUPT ; interrupt on RX entry movwf TMP_WREG ; 6: save W swapf STATUS, W ; 7: load STATUS movwf TMP_STATUS ; 8: save STATUS bsf CTS ; 9: request suspending reception RS_bodyRECEIVE .115200, RS_BITCOUNT, RX, 0, INDF, .9, -.3 clrf TMR0 ; 75: clear timer incf FSR, F ; 76: forward buffer pointer incf RS_COUNTER, F ; 77: count this byte swapf TMP_STATUS, W ; 78: movwf STATUS ; 79: restore STATUS swapf TMP_WREG, F ; 80: swapf TMP_WREG, W ; 81: restore W bcf INTCON, INTF ; 82: interrupt handled retfie ; 83: leave routine - 2 cycles of one stop bit left RS_delays END
| file: /Techref/member/eugene-ksf-/rs.asm, 6KB, , updated: 2003/5/28 08:50, local time: 2025/2/19 00:58,
owner: eugene-ksf-,
18.97.9.174:LOG IN
|
| ©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/techref/member/eugene-ksf-/rs.asm"> <PRE> TITLE "Example on using RS_bodySEND, RS_bodyRECEIVE macros";------------------------------------------------------------; Copyright: Eugene M. Hutorny © 2003,eugene@ksf.kiev.ua; Revision: V0.01; Date: Feb 25, 2003; Assembler: MPASM version 3.20.07;------------------------------------------------------------; Example on using RS_bodySEND, RS_bodyRECEIVE macros;------------------------------------------------------------ include "p16f84a.inc" include "rs.inc" #define CLOCK .4000000#define RX PORTB,0 ; RX Pin, RB0, input #define TX PORTB,1 ; TX Pin, RB1, output#define CTS PORTB,2 ; CTS pin, RB2, output #define RTS PORTB,6 ; RTS pin, RB6, input#define RS_BITCOUNT .8#define RS_BUFFSIZE .16 UDATATMP_WREG res 1 ; temporary storage for WREGTMP_STATUS res 1 ; - " - STATUSRS_DATA res 1 ; file register used in RSRS_COUNT res 1 ; bit counterRS_ALIGN res 1 ; alignment bitsRS_COUNTER res 1 ; recieved/echoed counterRS_BUFFER res RS_BUFFSIZE ; data buffernope macro ; nop 2 cycles long goto $+1 endm RS CODERS_SEND RS_bodySEND .115200, RS_BITCOUNT, TX, 0 return ;---------------------------------------------------------------------------RS_READBUFF ; READ incoming data to buffer bcf INTCON, INTF bsf INTCON, INTE bsf INTCON, GIE bcf CTS ; transmission shall begin clrf TMR0 ; clear timer bcf INTCON, T0IF ; clear timer expiration flagrx clrwdt btfsc RTS ; is RTS kept SPACE goto suspend ; no, suspend reception tstf RS_COUNTER ; test is something received skpnz goto rx ; if no bytes yet received, just wait btfsc INTCON, T0IF ; if timer expired goto suspend ; suspend reception tstf RS_COUNTER ; test RS_COUNTER skpnz ; if( RS_COUNTER > 0) goto rx ; continue receptionsuspend bsf CTS ; request suspending reception clrf TMR0 ; clear timer ; relaxation period after last byte recivedxr clrwdt movlw RS_BUFFSIZE - 1 subwf RS_COUNTER, W ; RS_COUNTER - (RS_BUFFSIZE - 1) skpnc ; if( RS_COUNTER - (RS_BUFFSIZE - 1) > 0) goto readdone btfsc RTS ; wait if space is kept SPACE goto readdone btfss TMR0, 2 ; time out = 4 timer ticks (1024 IC) ~ 1 ms, good for fast PC's goto xrreaddone bcf INTCON, GIE bcf INTCON, INTE ; disable INT interrupt return RS_INTERRUPT ; interrupt on RX entry movwf TMP_WREG ; 6: save W swapf STATUS, W ; 7: load STATUS movwf TMP_STATUS ; 8: save STATUS bsf CTS ; 9: request suspending reception RS_bodyRECEIVE .115200, RS_BITCOUNT, RX, 0, INDF, .9, -.3 clrf TMR0 ; 75: clear timer incf FSR, F ; 76: forward buffer pointer incf RS_COUNTER, F ; 77: count this byte swapf TMP_STATUS, W ; 78: movwf STATUS ; 79: restore STATUS swapf TMP_WREG, F ; 80: swapf TMP_WREG, W ; 81: restore W bcf INTCON, INTF ; 82: interrupt handled retfie ; 83: leave routine - 2 cycles of one stop bit left RS_delays END</PRE></A> |
| Did you find what you needed? |