CURSOR POSITIONING BY ROW AND COLUMN LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT DEFINITION When cursor positioning by row, the cursor at 0,0 is at the baseline of the first row of charactors based on the current VMI. Note: After a top margin is set it becomes the top boundary; i.e., row 0; but after a left margin is set, column 0 is still at the left edge of the logical page. CURSOR POSITIONING BY ROW AND COLUMN EcE Printer Reset Ec&l12E Sets a top margin of 12 lines. Ec&a15L Sets a left margin of 15 columns. Ec&a0r0C Cursor position to row zero, column zero. Ec(10U Selects the PC-8 symbol set. Ec(s1p24v0s0b4101T Selects a proportional, 24 point, upright, medium, CG Times font. This Is A Test Will print "This Is A Test" EcE Printer Reset Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1547.asc, 1KB, , updated: 1993/11/15 16:54, local time: 2018/10/19 22:40,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/language/pcl/lj1547.asc"> language pcl lj1547</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181019 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Neil, Bob Blick, Harold Hallikainen, John Gardner, AB Pearce - UKRI STFC,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!