io stepper linistep new201002

 

ON 20100205@3:44:01 PM at page:
On a web page you were interested in at:
http://www.piclist.org/io/stepper/linistep/faq.htm#40211.7221412037
James Newton[JMN-EFP-786] Published and replied to post 40211.7221412037 by charlton_dial

|Insert 'I would not recommend changing the capacitors. The PMinMO interface works just fine, the only difference is that what PMinMO uses as an enable line, we use as a low power line, so if you "disable" the stepper, it will still step, at low power.' at: '<!-- 40211.7221412037 EOR --><A style="color:#AF4040" TITLE="Click to login and reply" REL="nofollow" HREF="/techref/login/default.asp?req=/techref/update.asp%3Fact=reply%26url=/techref/io/stepper/linistep/new201002.txt%26id=40211.7221412037">+</A>'' but after: '<A TITLE="'.



ON 20100205@3:44:24 PM at page:
On a web page you were interested in at:
http://www.piclist.org/techref/io/stepper/linistep/faq.htm#40072.5271064815
James Newton[JMN-EFP-786] Published and replied to post 40072.5271064815 by rickk1

|Insert 'That is exactly right.' at: '<!-- 40072.5271064815 EOR --><A style="color:#AF4040" TITLE="Click to login and reply" REL="nofollow" HREF="/techref/login/default.asp?req=/techref/update.asp%3Fact=reply%26url=/techref/io/stepper/linistep/new201002.txt%26id=40072.5271064815">+</A>'' but after: '<A TITLE="'.



ON 20100219@4:47:54 PM at page:
On a web page you were interested in at:
http://www.piclist.com/io/stepper/linistep/4axis3build.htm#40228.4279050926
James Newton[JMN-EFP-786] removed post 40228.4279050926

|Delete '

  <LI>'



ON 20100223@10:26:46 AM at page:
On a web page you were interested in at:
http://www.piclist.com/io/stepper/linistep/faq.htm#40231.2852662037
James Newton[JMN-EFP-786] Published and replied to post 40231.2852662037 by ckaross

|Insert 'The Linistepper shouldn't have any problem at all with those motors. You should probably adjust the sense resistors to increase the drive to 2 amps. Running the extra current is unlikely to be a problem since the motor voltage is low, especially if you use a lower voltage supply. I would recommend a 9 volt supply instead of 12.' at: '<!-- 40231.2852662037 EOR --><A style="color:#AF4040" TITLE="Click to login and reply" REL="nofollow" HREF="/techref/login/default.asp?req=/techref/update.asp%3Fact=reply%26url=/techref/io/stepper/linistep/new201002.txt%26id=40231.2852662037">+</A>'' but after: '<A TITLE="'.



ON 20100225@3:40:52 PM at page:
On a web page you were interested in at:
http://www.piclist.org/io/stepper/linistep/index.htm#40234.3687615741
James Newton[JMN-EFP-786] removed post 40234.3687615741

|Delete '

  <LI>'

  .