The single largest challenge with the use of any sensor is conditioning the signal derived from it. Almost no sensor will produce a perfect, linear, scaled output in response to stimulii over all ranges of operation. Signal conditioners must compensate for non-linearity, offset, and the effects of temperature, voltage or other variations in the operating environment.
Measuring Inductance +
Measuring Torque +
|file: /Techref/io/sensors.htm, 4KB, , updated: 2020/10/21 10:15, local time: 2021/8/4 09:05,
|©2021 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/io/sensors.htm?key=rang"> Sensors</A>
|Did you find what you needed? "rang"|
PICList 2021 contributors:
o List host: MIT, Site host massmind.org, Top posters @20210804 Harold Hallikainen, RussellMc, Neil, Bob Blick, Alan Pearce, Allen Mulvey, Richard Prosser, Clint Jay, Jason White, madscientistatlarge,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!