DOS Console Device Input and Output The DOS CON device is always open as handle number 0 for input as STDIN and handle 1 for Output as STDOUT unless input or output has been redirected. DOS always maintains handle number 2 for output to the console as STDERR. Redirection can be detected using INT\21F\44SF\00
| file: /techref/dos/device/driver/cons.htm, 0KB, , updated: 1999/4/21 06:46, local time: 2008/12/3 16:55,
38.103.63.58:LOG IN
|
| ©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.piclist.com/techref/dos/device/driver/cons.htm"> dos device driver cons</A> |
| Did you find what you needed? |
|
PICList 2008 contributors:
o List host: MIT, Site host massmind.org, Top posters @20081203 Apptech, Jinx, Xiaofan Chen, olin piclist, Vitaliy, William \Chops\ Westfield, Tamas Rudnai, JonnyMac, Alan B. Pearce, Gerhard Fiedler, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Timothy Weber, on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
|
.