VER+Displaying the DOS VersionDisplays the version of DOS you are using.
VERSION
PC-DOS 2.0+
MS-DOS equivalent: VER (2.0+)
TYPE
Internal
SYNTAX
VER
The VER command is used to determine which version of DOS a
system is running under.
EXAMPLE
VER
returns
IBM Personal Computer DOS Version 3.30
if you are using PC-DOS 3.3.
------------------------------------------------------------------
[For related topics, press R]
SEE ALSO
CHKDSK Command
FORMAT Command
LABEL Command
SELECT Command
SYS Command
VOL Command
| file: /techref/dos/command/ver.htm, 0KB, , updated: 1999/2/20 11:24, local time: 2008/10/12 21:59,
38.103.63.61:LOG IN
|
| ©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.piclist.com/techref/dos/command/ver.htm"> dos command ver</A> |
| Did you find what you needed? |
|
o List host: MIT, Site host massmind.org, Top posters @20081012 Apptech, Jinx, Xiaofan Chen, olin piclist, Vitaliy, Alan B. Pearce, William \Chops\ Westfield, JonnyMac, Tamas Rudnai, Gerhard Fiedler, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Timothy Weber, on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
|
.