TIME+Displaying the Current Time
Displays the current time and allows you to reset the time.
PC-DOS 2.0+ (revised from 1.0; revised again in 3.3)
MS-DOS equivalent: TIME (2.0+; revised from 1.0)
.xx Hundredths of seconds
sets the time to 21:30:00:00 (9:30 p.m.).
returns the current time as indicated by the system clock and
prompts you for a new time. You can accept the current time by
Reenter the time in the correct format, with a colon (:) between
hours and minutes as well as between minutes and seconds. Use a
period (.) between seconds and hundredths of a second.
If you set the time incorrectly, use the TIME command a
second time and enter the current time.
In version 3.3 of PC-DOS, the TIME command also changes the
permanent clock, if the system has one.
[For related topics, press R]
|file: /Techref/dos/command/time.htm, 1KB, , updated: 1999/2/20 11:24, local time: 2017/10/19 15:07,
|©2017 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/dos/command/time.htm"> dos command time</A>
|Did you find what you needed?|
PICList 2017 contributors:
o List host: MIT, Site host massmind.org, Top posters @20171019 RussellMc, Van Horn, David, James Cameron, Sean Breheny, IVP, alan.b.pearce, Neil, David C Brown, Bob Blick, Denny Esterline,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!